Epson EPL-6000 User Manual - Page 148
Transporting Your Printer, Packing for transportation, and computer.
View all Epson EPL-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Transporting Your Printer If you need to move the printer a short distance, such as from one room to another, make sure that you keep the printer level. If you are shipping the printer, you need to repackage the printer and its accessories. Read and carefully follow the instructions below. Also make sure that the shipper takes adequate precautions to avoid damaging the printer. WARNING: Do not ship the printer with the drum unit and developer unit installed in the printer. Also, do not vacuum toner out of the developer unit. Packing for transportation To pack the printer you need all the original packing materials that came with the printer and some packing tape. You also need two large plastic bags for packing the drum unit and developer unit, to contain any toner displaced during shipping. Prepare the EPL-6000 for transportation by following the steps below: 1. Be sure that your printer and computer are turned off. 2. Remove the power cord and the cable connecting your printer and computer. 3. Remove any cartridges from the cartridge slots. 4. Remove any paper still in the paper cassette. Then remove the paper cassette and the faceup output tray from the printer. Repackage each tray in its original packing material. 5. Open the printer using the latch at the front. 6. Lift out the basket and place it on a flat surface. Maintenance and Transportation 6-33