Epson EPL-6000 User Manual - Page 159
Error 22, Reset/continue, Font Cart Error, Source, Insertion Error, Paper Empty, Paper Jan
![]() |
View all Epson EPL-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Error Messages ERROR 22 The buffer has overflowed due to a communication protocol error. Make sure that your SelecType settings match the communication protocol settings of your computer. If the problem persists, contact your authorized Epson dealer for service. ERROR 40 A parity or baud rate error has occurred. Press the RESET/CONTINUE button to clear the error. Make sure your SelecType settings match your computer configuration. If the problem persists, contact your authorized Epson dealer for service. FONT CART ERROR The font cartridge selected using the FONT SOURCE SelecType option is not installed properly. Turn the power off. Then remove the cartridge and reinsert it. Turn the power back on and resend the print job. If the problem persists, make sure that the correct FONT SOURCE option has been selected in SelecType. See the section on SelecType in Chapter 3 for details. INSERTION ERROR There is a paper feeding problem. See the section on paper jams in this chapter for details. PAPER EMPTY There is no paper in the paper cassette or the paper cassette is not installed properly. Load more paper into the paper cassette or properly install the cassette. See Chapter 4 for details. PAPER JAN Paper is jammed inside the printer. See the section on paper jams in this chapter. 7-4 Troubleshooting
![](/manual_guide/products/epson-epl6000-user-manual-3510eac/159.png)