Epson EPL-6000 User Manual - Page 98
Memory management, Reset, ON LINE, RESET/CONTINUE
View all Epson EPL-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
HP Emulation Removing a font cartridge To remove a font cartridge, follow these steps: 1. Press the ON LINE button to set the printer off line. CAUTION: Never insert or remove the cartridge while the printer is on line. 2. Hold the edges of the cartridge and slowly pull it from the slot. 3. Press the ON LINE button to set the printer on line. Memory management Your printer has a standard memory of 512KB expandable to 2.5MB with the purchase of the optional 2MB memory board. An additional 2MB can be added to the optional memory board for a total memory of 4.5MB. If you wish to print full-page, 300 dot-per-inch graphics or perform other sophisticated print jobs, it is recommended that you install the optional 2MB memory board. Reset The printer can be reset in the following three ways: 1. By turning the power off and then back on 2. By holding down the RESET/CONTINUE button for three seconds (with the printer off line) 3. By sending the ESC E command. Printer Modes 5-5