Epson EPL-6000 User Manual - Page 52
Turn your printer off before setting the, switches. Then turn it back on to implement your changes.
View all Epson EPL-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Connecting to Your Computer The DIP switches are located at the back of your printer and are numbered 1 through 8. The DIP switch settings are listed below. Use the tip of a ballpoint pen or another small pointed object to turn the switches ON or OFF. Pressing a switch down sets it ON and up sets it OFF. CAUTION: Turn your printer off before setting the switches. Then turn it back on to implement your changes. RS-232C RS-422A 1 OFF OFF 2 OFF OFF 3 4 5 6 OFF OFF l OFF OFF OFF OFF ON 7 OFF ON 6 ON OFF * If DIP switch 5 is turned ON when the RS-232C serial interface is in use, pin 25 on the connector is set to +5V; if the DIP switch is turned OFF, the pin on the connector is not used. Testing and Connecting Your Printer 2-15
Connecting to Your Computer
The DIP switches are located at the back of your printer and are
numbered 1 through 8.
The DIP switch settings are listed below. Use the tip of a ballpoint
pen or another small pointed object to turn the switches ON or OFF.
Pressing a switch down sets it ON and up sets it OFF.
CAUTION:
Turn your printer off before setting the
switches. Then turn it back on to implement your changes.
1
2
3
4
5
6
7
6
RS-232C
OFF
OFF
OFF
OFF
l
OFF
OFF
ON
RS-422A
OFF
OFF
OFF
OFF
OFF
ON
ON
OFF
* If DIP switch 5 is turned ON when the RS-232C serial interface is in use, pin 25
on the connector is set to +5V; if the DIP switch is turned OFF, the pin on the
connector is not used.
Testing and Connecting Your Printer
2-15