Epson EPL-6000 User Manual - Page 69
the PARALLEL, SERIAL, BAUD RATE, DATA BIT, PARITY, STOP BIT, ROBUST-XON, Interface submenu
![]() |
View all Epson EPL-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Using SelecType Interface submenu To enter the interface submenu from the main menu, follow the steps below: 1. Press the or button until you see the I/F function in the display. 2. Press the SET button to activate the menu option. (The option starts blinking, indicating that it has been activated.) 3. If the I/F function is set to the PARALLEL option, press the button to select the SERIAL option. 4. Press the SET button to set the SERIAL option. An asterisk (*) appears next to SERIAL. 5. Press the SET button a third time to enter the interface submenu, where you can change options for the menu functions listed below. (The SelecType Options section in this chapter describes options for these functions in detail.) BAUD RATE PROT DATA BIT PARITY STOP BIT ROBUST-XON 6. Use the or button to move to a function you want to change. Note: This submenu does not work in a loop. Pressing the button when BAUD RATE is displayed or pressing the button when ROBUST-XON is displayed causes you to exit the submenu and return to the main menu. 3-16 Using the Printer
![](/manual_guide/products/epson-epl6000-user-manual-3510eac/69.png)