Epson ET-3843 Users Guide - Page 220
LCD screen message, Condition/solution, Print Queue, USBXXX, EpsonNet Print Port, Parent topic
View all Epson ET-3843 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
LCD screen message Condition/solution Check that the printer Click Print Queue on the printer driver's Maintenance tab. Make sure the driver is installed on the printer port is selected correctly in Property > Port from the Printer menu as computer and that the follows: port settings for the printer are correct. Select USBXXX for a USB connection or EpsonNet Print Port for a network connection. Check that the printer driver is installed on the computer and that the USB port settings for the printer are correct. Recovery mode Update Firmware An error has occurred during firmware updating. Connect your product using a USB cable and try updating the firmware again. If you still receive this error message, contact Epson for support. Note: The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages. During the life of your product it may reach a condition where either satisfactory print quality cannot be maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your LCD screen, or lights on the control panel will advise you when these parts need replacing. If this happens during the standard warranty of the product, the exchange of the product or replacement of the pads is covered under the standard warranty. If the product is out of warranty, the pads can be replaced by any Epson authorized service provider. The waste ink pads are not a user-replaceable part. Parent topic: Solving Problems Related concepts Maintenance Box Replacement Uninstall Your Product Software Related references Paper Source Settings Options Where to Get Help Related tasks Refilling the Ink Tanks Loading Paper in the Cassette Using AirPrint Checking for Software Updates 220