Epson ET-M3170 Users Guide - Page 231
Power Cleaning, Power Cleaning Using the Product Control Panel, Finish, Parent topic
View all Epson ET-M3170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
• If almost the entire pattern is missing, click Finish and perform a Power Cleaning. If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait at least six hours. Run a nozzle check again. If quality still does not improve, run a Power Cleaning. If there is still no improvement, contact Epson support. Parent topic: Print Head Cleaning Related references Where to Get Help Related tasks Refilling the Ink Tank Power Cleaning Using a Computer Utility Related topics Loading Paper Power Cleaning If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head several times, you can run a Power Cleaning. If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12 hours before running another Power Cleaning. Caution: Running a Power Cleaning consumes a lot of ink, so you should run it only if necessary. Make sure the ink tank is at least one-third full before running a Power Cleaning, or it may damage the product. Caution: Power Cleaning may cause the maintenance box to reach its capacity sooner. When the maintenance box is full, you need to replace it to continue printing. Power Cleaning Using the Product Control Panel Power Cleaning Using a Computer Utility Parent topic: Print Head Maintenance Power Cleaning Using the Product Control Panel You can run a Power Cleaning using the control panel on your product. Note: If the maintenance box is full, you may have to replace it before you can run a Power Cleaning. After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another Power Cleaning. 231