Epson Expression 1600 User Manual - Page 95
Removing the Shipping Screw, Installing the Transparency Unit
View all Epson Expression 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Removing the Shipping Screw To prevent damage during shipping, a shipping screw is attached to the transparency unit to secure its lamp assembly. You must remove this screw before using the transparency unit. 1. Turn the transparency unit so the glass side faces up. 2. Use a Phillips head (cross head) screwdriver to remove the shipping screw from the hole labeled CLAMP, as shown at right. 3. Install the screw in the storage hole labeled STOCK. Before transporting the scanner, be sure to reinstall the shipping screw in the hole labeled CLAMP, and slide the transportation lock at the back of the scanner to the LOCK position. Installing the Transparency Unit Follow these steps to install the transparency unit on the scanner. 1. Make sure the scanner is turned off. Then unplug the power cable from the scanner. 2. Remove the document cover by grasping the back of the document cover as shown and easing the cover up. 3. Make sure the document table is clean and dust free. 95