Epson LQ-300 Product Information Guide - Page 3

Environmental, Safety Approvals, INTERFACE SPECIFICATIONS, THE CONTROL PANEL

Page 3 highlights

Environmental Temperature: Operation: 5 to 35OC (41 to 95°F) Operation (film ribbon): 15 to 35OC (59 to 95OF) Operation (envelopes, labels, or recycled paper): 15 to 25OC (59 to 77OF) Storage: -20 to 55OC (-4 to 13lOF) Humidity (without condensation): Operation: 5 to 80% RH Operation (film ribbon): lOtow%RH Operation (envelopes, labels, or recycled paper): 2oto6o%RH Storage: 5 totE%RH Safety approvals Safety standards: US model UL1950 with D3, CSA22.2 No.950 with D3 .-\ European EN 60950 (TUV) model IEC 950 (SEMKO, DEMKO, NEMKO, SETI) RFk US model European model FCC part 15 subpart B class B Vfg 243 (VDE 0878 part 3, part 30) EN 55022 (CISPR Pub. 22) Class B Interface Specifications Your printer is equipped with an ETA-232D serial interface and a Centronics@~ompatible parallel interface. The printer switches automatically to the appropriate interface when it receives data. Parallel interface specifications The parallel interface has the following characteristics. Data format: 8-bit Synchronization: STROBE pulse Handshaking: BUSY and ACKNLG signals Signal level: TTL compatible Connector: 36-pin 57-30360 Amphenol connector or equivalent EPSON LQ-300 Serial interface specifications The serial interface has the following characteristics. Bit rate: 300,600,1200,2400,4800,9600,19200 bps (selectable) Word length: Data format Start bit Parity bit Stop bit 7 or 8-bit (selectable) 1 bit Odd, even, or none (selectable) 1 bit Synchronization: Asynchronous Handshaking: Parity check: DTR protocol, XON/XOFF protocol ETX/ACK protocol (selectable) Odd, even, or no panty bit (selectable) Connector: ETA standard, 25pin, D-SUB, female COMector Serial pin assignments The following table lists the serial connector pin assignments and describes their respective interface signals. ~PlnNaIsgml 1 Rateah hIld (ffi) 2 TmmiIWData(TXCWD). 3 Fbaiuadoeb(Fu(DIRD) 4 4 fh-bS@nd(RTSIRS) 7 srpnrl-W90) 11 ihrseohamd 20 ~~T~~~IARu~(DTRER) !- out In out - out out p-w= 1 RbwsdmsaisQound Rbkh8ahnmnimdawidd Rbbrhesraoeimd~d kw* Rebmphbrdahamlrds@@s camecbdtoun20 PoiliveMenhepinbrismadytoacuwtdah rdmgdwhmReprWrisnotrsdy The Control Panel sul8selif0 0 Courie* 0 You can control simple printer operatio-uch as line feeding, form feeding, loading and ejecting paper, and selecting fonts-with the buttons on the control panel. The control panel lights show the printer's status and the current font. Dot Matrix Printers 10/2/94 EPSON LQ-300-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

EPSON LQ-300
Environmental
Temperature:
Operation:
5 to
35OC
(41 to 95°F)
Operation (film ribbon):
15 to
35OC
(59 to
95OF)
Operation (envelopes, labels, or recycled paper):
15 to
25OC
(59 to
77OF)
Storage:
-20 to
55OC
(-4 to
13lOF)
Humidity (without condensation):
Operation:
5 to 80% RH
Operation (film ribbon):
lOtow%RH
Operation (envelopes, labels, or recycled paper):
2oto6o%RH
Storage:
5
totE%RH
Safety approvals
Safety standards:
US model
UL1950
with D3, CSA22.2 No.950 with D3
.-\
European
EN 60950
(TUV)
model
IEC
950 (SEMKO,
DEMKO,
NEMKO,
SETI)
RFk
US model
FCC part 15 subpart B class B
European
Vfg 243
(VDE
0878 part 3, part 30)
model
EN 55022 (CISPR
Pub. 22) Class B
Interface Specifications
Your printer is equipped with an
ETA-232D
serial interface
and a
Centronics@~ompatible
parallel interface. The printer
switches automatically to the appropriate interface when it
receives data.
Parallel interface specifications
The parallel interface has the following characteristics.
Data format:
8-bit
Synchronization: STROBE pulse
Handshaking:
BUSY and ACKNLG signals
Signal level:
TTL compatible
Connector:
36-pin 57-30360 Amphenol connector or
equivalent
Serial interface specifications
The serial interface has the following characteristics.
Bit rate:
300,600,1200,2400,4800,9600,19200
bps
(selectable)
Word length:
Data format
7 or
8-bit
(selectable)
Start bit
1 bit
Parity bit
Odd, even, or none (selectable)
Stop bit
1 bit
Synchronization: Asynchronous
Handshaking:
DTR protocol,
XON/XOFF
protocol
ETX/ACK
protocol (selectable)
Parity check:
Odd, even, or no panty bit (selectable)
Connector:
ETA
standard,
25pin,
D-SUB, female
COMector
Serial
pin assignments
The following table lists the serial connector pin assignments
and describes their respective interface signals.
~PlnNaIsgml
!-
p-w=
1
1
Rateah
hIld
(ffi)
-
RbwsdmsaisQound
2
TmmiIWData(TXCWD).
out
Rbkh8ahnmnimdawidd
3
Fbaiuadoeb(Fu(DIRD)
4
In
Rbbrhesraoeimd~d
4
fh-bS@nd(RTSIRS)
out
kw*
7
srpnrl-W90)
-
Rebmphbrdahamlrds@@s
11
ihrseohamd
out
camecbdtoun20
20
~~T~~~IARu~(DTRER)
out
PoiliveMenhepinbrismadytoacuwtdah
rdmgdwhmReprWrisnotrsdy
The Control Panel
sul8selif0
0
Courie*
0
You can control simple printer
operatio-uch
as line
feeding, form feeding, loading and ejecting paper, and
selecting fonts-with the buttons on the control panel. The
control panel lights show the printer’s status and the current
font.
Dot Matrix Printers
10/2/94
EPSON LQ-300-3