Epson LQ-300 Product Information Guide - Page 8

SETTING UP YOUR SOFTWARE, software - driver

Get Epson LQ-300 - Impact Printer PDF manuals and user guides View all Epson LQ-300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

EPSON LQ-300 1. Make sure the printer is turned off and the paper-release 4. Slide a sheet of paper down firmly between the edge ' lever is pushed back to the single-sheet position. Raise the guides until it meets resistance. The printer loads the paper guide upright. sheet automatically. While hokling down the LF/FF button turn on the printer. Release the button after the Pause light flashes. The beeper sounds three times, indicating the printer is out of paper* Slide the left edge guide until it locks in place at the triangular guide mark Next, adjust the right edge guide to match the width of your paper. RI Caution: Always close the printer cover while the printer is printing. The printer cm& helps the paperfeed prqxrly. 5. To stop printing temporarily, press the Taupe button 6. To end the self test, make sure the printer is not printing. Press LF/FF to elect the sheet; then turn off the printer. Setting Up Your software Most software lets you specify the type of printer you use so that you can take full advantage of the printer's features. Your software probably provides an mstallation or setup section that includes a list of printers. Microsoft® Windows™ 3.1 and all Windows progr;ilms If Windows is installed on your computer system, follow the steps below to install the right driver for your printer. Your printer will work correctly for all your Windows programs, such as Word for Windows, Lotus" l-2-3" for Windows, and CorelDRAW? If Windows is mt already installed on your system, run the Windows setup program as described in the documentation that comes with the program. Follow steps 4 through 10 below when you reach the section about choosing a printer. 1. In the Main window, double click the Control Panel icon. 2. Double click the Printers icon. 3. Choose the Ad&> button. EPSON LQ-300-8 10/2/94 Dot Matrix Printers

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
EPSON LQ-300
1. Make sure the printer is turned off and the paper-release
lever is pushed back to the single-sheet position. Raise the
4. Slide a sheet of paper down firmly between the edge
paper guide upright.
guides until it meets resistance. The printer loads the
sheet automatically.
While
hokling
down the
LF/FF
button turn on the printer.
Release the button
after the
Pause light flashes. The
beeper sounds three times, indicating the printer is out of
paper*
Slide the left edge guide until it locks in place at the
triangular
guide mark Next, adjust the
right
edge guide
to match the width of your paper.
’
RI
Caution:
Always close the
printer
cover while the printer is printing.
5.
6.
The
printer
cm&
helps the
paperfeed
prqxrly.
To stop printing temporarily, press the
Taupe
button
To end the self test, make sure the printer is not printing.
Press
LF/FF
to elect the sheet; then turn off the printer.
Setting Up Your
software
Most software lets you specify the type of printer you use so
that you can take full advantage of the printer’s features.
Your software probably provides an
mstallation
or setup
section that includes a list of printers.
Microsoft
®
Windows
™
3.1 and all Windows
progr;ilms
If Windows is installed on your computer system, follow the
steps below to install the
right
driver for your printer. Your
printer will work correctly for all your Windows programs,
such as Word for Windows,
Lotus”
l-2-3”
for Windows, and
CorelDRAW?
If Windows is
mt
already installed on your system, run the
Windows setup program as described in the documentation
that comes with the program. Follow steps 4 through 10
below when you reach the section about choosing a printer.
1. In the
Main
window, double click the
Control Panel
icon.
2. Double click the
Printers
icon.
3.
Choose the
Ad&>
button.
EPSON LQ-300-8
10/2/94
Dot Matrix Printers