Epson LS10500 Users Guide - Page 125
Solutions When the Image is Fuzzy or Blurry, Deinterlacing, Noise Reduction, Tracking, Sharpness
View all Epson LS10500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
• Check the settings on the projector's Signal menu to make sure they match the video source.If available for your video source, adjust the Deinterlacing and Noise Reduction settings. • Select a computer video resolution and refresh rate that are compatible with the projector. • If you are projecting from a computer using a VGA cable, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings. • If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality. • If you connected an extension power cable, try projecting without it to see if it caused interference in the signal. • Try turning off Frame Interpolation, or turn on Image Enhancement in the Image menu. Parent topic: Solving Image Problems Related references Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Solutions When the Image is Fuzzy or Blurry If the projected image is fuzzy or blurry, try the following solutions: • Adjust the image focus. • Check the lens for condensation. Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Position the projector close enough to the screen, and directly in front of it. • Position the projector so the keystone adjustment angle is not so wide that it distorts the image. • Adjust the Sharpness setting to improve image quality. • If you are projecting from a computer, use a lower resolution. Parent topic: Solving Image Problems Related references Image Quality Settings - Image Menu Related tasks Focusing the Image with the Lens Button 125