Epson LS10500 Users Guide - Page 62
Adjusting the Color Convergence (Panel Alignment), Adjust Focus, Parent topic, Settings, Enter
View all Epson LS10500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
2. Press the Lens button on the control panel or remote control. 3. Press the Lens button repeatedly until Adjust Focus is displayed on the screen. 4. To focus the image, press and hold the left or right arrow button on the projector's remote control or use the thumbstick on the control panel. 5. Press the Esc button on the control panel or remote control when finished. Parent topic: Using Basic Projector Features Adjusting the Color Convergence (Panel Alignment) You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the red, green and blue colors) in the projected image. Note: Allow your projector to warm up for at least 10 to 15 minutes and make sure the image is in focus before you use the Panel Alignment feature. For best results, project an image sized at least 60 inches (152 cm) diagonally on a projection surface that is not colored or textured. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Settings menu and press Enter. 62