Epson LS10500 Users Guide - Page 46
Enter, EPSONWEB, admin, remote, config, If you connect from a web browser on a smartphone or tablet
View all Epson LS10500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
1. Make sure the projector is turned on. 2. Start your web browser on a computer or device connected to the network. 3. Type the projector's IP address into the browser's address box and press the computer's Enter key. Note: You may need to log in before you see the Web Control screen. If you see a log in window, enter your user name and password. (The default user name is EPSONWEB and the default password is admin.) You see the Web Control screen. Note: If you connect from a web browser on a smartphone or tablet, a screen with two options is displayed. Select remote to display the Web Remote page, or select config to display the Web Control page. 46
46
1.
Make sure the projector is turned on.
2.
Start your web browser on a computer or device connected to the network.
3.
Type the projector's IP address into the browser's address box and press the computer's
Enter
key.
Note:
You may need to log in before you see the Web Control screen. If you see a log in window,
enter your user name and password. (The default user name is
EPSONWEB
and the default
password is
admin
.)
You see the Web Control screen.
Note:
If you connect from a web browser on a smartphone or tablet, a screen with two options is
displayed. Select
remote
to display the Web Remote page, or select
config
to display the Web
Control page.