Epson LS10500 Users Guide - Page 53
Pairing the 3D Glasses with the Projector, Pairing, Parent topic, Related references
View all Epson LS10500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Optional Equipment and Replacement Parts Pairing the 3D Glasses with the Projector Pair the glasses with the projector to establish communication between them for 3D viewing. 1. Turn on the projector. 2. Set the image source to HDMI on the projector. 3. Project a 3D image. 4. Slide the power switch on the 3D glasses to the On position. 5. Move the glasses within 10 feet (3 m) of the projector and hold down the Pairing button for at least three seconds. The status light on the glasses flashes green and red. If pairing is successful, the light turns green for 10 seconds and then turns off. Parent topic: Viewing 3D Images Related references Optional Equipment and Replacement Parts 53
53
Optional Equipment and Replacement Parts
Pairing the 3D Glasses with the Projector
Pair the glasses with the projector to establish communication between them for 3D viewing.
1.
Turn on the projector.
2.
Set the image source to HDMI on the projector.
3.
Project a 3D image.
4.
Slide the power switch on the 3D glasses to the
On
position.
5.
Move the glasses within 10 feet (3 m) of the projector and hold down the
Pairing
button for at least
three seconds.
The status light on the glasses flashes green and red. If pairing is successful, the light turns green
for 10 seconds and then turns off.
Parent topic:
Viewing 3D Images
Related references
Optional Equipment and Replacement Parts