Epson LS10500 Users Guide - Page 38

Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wired Network Monitoring and Control Setting Up Projector Network E-Mail Alerts Setting Up Network Monitoring Controlling a Networked Projector Using a Web Browser Wired Network Monitoring and Control You can monitor, configure, and control your projector through a wired network. You can also send email alerts from the projector when a problem occurs. To do this, you connect the projector to your network, and then set up your projector and computer for network monitoring. Connecting to a Wired Network Selecting Wired Network Settings Parent topic: Using the Projector on a Network Connecting to a Wired Network To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network cable. To ensure proper data transmission, use a Category 5 shielded cable or better. 1. Connect one end of the network cable to your network hub, switch, or router. 2. Connect the other end of the cable to the projector's LAN port. Parent topic: Wired Network Monitoring and Control 38