Epson LS500B Users Guide - Page 130
On/Standby, light, Status light, Laser light, Temp light, Status and solution, High Altitude
![]() |
View all Epson LS500B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
On/Standby light Flashing Off Flashing Off Status light Varies Flashing Varies Flashing Laser light Temp light Off Flashing Off Solid Flashing Off Solid Off Status and solution Projector is too hot. If the temperature continues to rise, projection will stop automatically. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • Make sure the environmental temperature around the air intake vents is not too hot. Projector has overheated and turned off. Leave it turned off to cool down and wait about five minutes. After the fan has stopped, disconnect the power cord and do the following: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Make sure the environmental temperature around the air intake vents is not too hot. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Laser warning. Turn the projector off, unplug it, and contact Epson for help. Laser has a problem. Turn the projector off, unplug it, and contact Epson for help. 130
![](/manual_guide/products/epson-ls500b-users-guide-adab8e7/130.png)