Epson LS500B Users Guide - Page 133
Solutions When \, Displaying From a PC Laptop, Related references, Source, Reset, Parent topic
![]() |
View all Epson LS500B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Related references Projector Light Status Projector Setup Settings - Extended Menu Input Signal Settings - Signal Menu Projector Reset Options - Reset Menu Solutions When "No Signal" Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source button on the projector's control panel or remote control repeatedly to cycle through the available sources. Wait a few seconds for an image to appear on each source you cycle through. • Press the Home button on the projector's control panel to select from a list of available sources (shown in black text). • Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary. • Check the connection from the projector to your video sources. • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor. • If necessary, turn the projector and the connected computer or video source off and then on again. • If you are projecting from an HDMI source, replace the HDMI cable with a shorter one. • Try a different video cable. • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu. Displaying From a PC Laptop Displaying From a Mac Laptop Parent topic: Solving Image or Sound Problems Related concepts Projector Connections Related tasks Selecting an Image Source Displaying From a PC Laptop If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to display on an external monitor. 133
![](/manual_guide/products/epson-ls500b-users-guide-adab8e7/133.png)