Epson LS500B Users Guide - Page 40
Using the Projector on a Network, Wired Network Projection, Connecting to a Wired Network
![]() |
View all Epson LS500B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Note: Epson iProjection is not recommended for use with streaming video. Wired Network Projection Wireless Network Projection Wired Network Projection You can project through a wired network. To do this, you connect the projector to your network with an Ethernet cable, and then set up your projector and computer for network projection. After connecting and setting up the projector, install the projector software. You may need to install it from a software CD, if included, or download the software and manuals as necessary. Note: If your projector is connected via a LAN (Ethernet) cable to a network that includes a wireless access point, you can connect to the projector wirelessly through the access point using the Epson network software. Connecting to a Wired Network Selecting Wired Network Settings Parent topic: Using the Projector on a Network Related references Additional Projector Software and Manuals Connecting to a Wired Network To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network cable. To ensure proper data transmission, use a Category 5 shielded cable or better. 1. Connect one end of the network cable to your network hub, switch, or router. 40
![](/manual_guide/products/epson-ls500b-users-guide-adab8e7/40.png)