Epson LS500B Users Guide - Page 135
Solutions When Only a Partial Image Appears, Solutions When the Image is Not Rectangular
View all Epson LS500B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Related references Supported Video Display Formats Projector Information Display - Info Menu Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Check the Blanking setting in the Settings menu. • Select a different image aspect mode in the Signal menu. • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.) • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.) • Make sure you selected the correct Projection setting. • Try adjusting the image position using the Image Shift setting in the Settings menu. • If you are passing the video signal through another device, make sure the device is set up correctly, then try connecting the video source directly to the projector. • If you are viewing a 3D image, make sure you selected the correct 3D format. • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu. Parent topic: Solving Image or Sound Problems Related references Projector Setup Settings - Extended Menu Projector Feature Settings - Settings Menu Input Signal Settings - Signal Menu Projector Reset Options - Reset Menu Related tasks Changing the Image Aspect Ratio Resizing the Image with the Zoom Setting Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. 135