Epson LS500B Users Guide - Page 88
Adjusting the Color Convergence (Panel Alignment), Select
![]() |
View all Epson LS500B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Adjusting the Color Convergence (Panel Alignment) You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the red and blue colors) in the projected image. Note: You can adjust only the red or blue color convergence. Green is the standard color panel and cannot be adjusted. Note: Allow your projector to warm up for at least 10 to 15 minutes and make sure the image is in focus before you use the Panel Alignment feature. For best results, project an image sized at least 60 inches (152 cm) diagonally in a dark room and on a projection surface that is not colored or textured. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Extended menu and press Enter. 4. Select the Display setting and press Enter. 5. Select the Panel Alignment setting and press Enter. 6. Select the Panel Alignment setting and press Enter. 7. Select On and press Enter. 8. Select the Select Color setting and choose one of the following: • R to adjust the red color convergence. 88
![](/manual_guide/products/epson-ls500b-users-guide-adab8e7/88.png)