Epson P10000 User Manual - Page 188
LCD screen message, Condition/solution, Roll Paper, Paper Source, Paper Size Check, Paper Eject Error
View all Epson P10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
LCD screen message Condition/solution Paper Load Error The loaded paper is not detected by the printer. Check the following: No paper detected. • If you are using roll paper, remove and reload the roll paper. Cut the leading edge of the roll paper straight horizontally. Cut off any jagged or folded sections of paper. • If you are using poster board or a cut sheet, remove and reload the paper. Make sure the paper is loaded straight and is not skewed. Paper Load Error Paper is jammed inside the printer. Remove the jammed paper. Some paper has not been fed. Paper Eject Error Check the following: Could not eject paper. • Press the OK button. If paper is jammed inside the printer, remove it. • If you are using roll paper, make sure you selected Roll Paper as the Paper Source setting on the LCD screen. Paper Cut Error Remove uncut paper. Press the OK button, pull down on the paper, and cut it using scissors or another manual cutter. Paper Size Error The loaded paper is not a supported width. Remove the paper and press the Loaded paper size is not OK button. supported size. If the message still appears when you have loaded paper in a supported width, set the Paper Size Check setting to Off on the LCD screen. 188