Epson PictureMate Using PictureMate With a Computer - Page 3

Installing Software and Connecting PictureMate, Install PictureMate for Windows

Page 3 highlights

Installing Software and Connecting PictureMate To connect PictureMate, you'll need this cable: Type A to B USB cable If you don't already have a USB cable, you can buy one from your local computer dealer or from Epson.® See the inside back cover for details. When you're ready to start, see the section for your computer system: ■ For Windows®, see below. ■ For Macintosh®, see page 6. Install PictureMate for Windows First make sure PictureMate is NOT CONNECTED to your computer, and REMOVE your memory card, if it's inserted. Then: 1. Load a sheet of PictureMate Photo Paper, glossy side up, against the right edge of the paper feeder. Slide the edge guide against the paper and open the output tray. 2. Press the P On button to turn on PictureMate. 3. Turn on your computer. 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

1
Installing Software and Connecting PictureMate
To connect PictureMate, you’ll need this cable:
If you don’t already have a USB cable, you can buy one from your local
computer dealer or from Epson.
®
See the inside back cover for details.
When you’re ready to start, see the section for your computer system:
For Windows,
®
see below.
For Macintosh,
®
see page 6.
Install PictureMate for Windows
First make sure PictureMate is
NOT
CONNECTED
to your computer,
and
REMOVE
your memory card, if it’s inserted. Then:
1.
Load a sheet of PictureMate Photo Paper,
glossy side up, against the right edge of the
paper feeder. Slide the edge guide against
the paper and open the output tray.
2.
Press the
P
On
button to turn on PictureMate.
3.
Turn on your computer.
Type A to B
USB cable