Epson PowerLite 822 User's Guide

Epson PowerLite 822 Manual

Get Epson PowerLite 822 PDF manuals and user guides View all Epson PowerLite 822 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson PowerLite 822 manual content summary:

  • Epson PowerLite 822 | User's Guide - Page 1
    PowerLite® 822+/83+ Multimedia Projector User's Guide
  • Epson PowerLite 822 | User's Guide - Page 2
    User's Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. WARNING: The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation. Caution: When you replace the lamp
  • Epson PowerLite 822 | User's Guide - Page 3
    18 Connecting with the VGA Cable 18 Connecting with a VGA-5BNC Cable 20 Connecting an External Monitor 21 Playing Sound Through the Projector 22 Connecting External Speakers 23 Connecting to Video Sources 24 Connecting a Composite Video Source 25 Connecting an S-Video Source 26 Connecting an
  • Epson PowerLite 822 | User's Guide - Page 4
    Down the Projector 42 3 Using the Remote Control 43 Controlling the Picture and Sound 44 Switching Between Picture Sources 44 Adjusting the Color Mode 45 Turning Off the Picture and Sound 46 Stopping Action 46 Zooming Your Image 47 Changing the Image's Aspect Ratio 47 Replacing the
  • Epson PowerLite 822 | User's Guide - Page 5
    Air Filter 72 Replacing the Lamp 74 Resetting the Lamp Timer 77 Transporting the Projector 78 6 Solving Problems 79 Using On-Screen Help 80 What To Do When the Lights Flash 80 Solving Problems with the Image or Sound 82 Solving Password Problems 87 Solving Problems with the Remote Control
  • Epson PowerLite 822 | User's Guide - Page 6
    Projector 101 A Technical Specifications 103 General 103 Projection Lamp 104 Remote Control 104 Dimensions 104 Electrical 104 Environmental 105 Safety and Approvals 105 Compatible Video Formats 106 Compatible Computer Display Formats 107 B Notices 111 Important Safety Instructions
  • Epson PowerLite 822 | User's Guide - Page 7
    PowerLite® 822+/83+ is a portable projector that weighs less than 7 pounds. The projector offers 2600 ANSI lumens (822+) or 2200 ANSI lumens (83+) and many iMac® and iBook® series systems. With Epson's patented SizeWise™ technology, the projector supports computer displays ranging from VGA through
  • Epson PowerLite 822 | User's Guide - Page 8
    projector, you can assign a password, create a user logo which is displayed at startup to identify the projector, and disable the projector , and other video sources to your projector. See page 24 for instructions. ■ Using the remote control The remote control lets you switch from computer to video
  • Epson PowerLite 822 | User's Guide - Page 9
    remote control or projector to get quick solutions for common problems. See page 80 for details. ■ epson.com/support Download FAQs (frequently asked questions) and e-mail your questions to Epson support on the PowerLite 822+ or PowerLite 83+. If you still need help after checking this User's Guide
  • Epson PowerLite 822 | User's Guide - Page 10
    repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada, usually within one business day. See the Extra Care Road Service brochure for details. To register, complete the registration form that came with your projector and mail it to Epson. Or register your
  • Epson PowerLite 822 | User's Guide - Page 11
    , make sure you have all these items: Projector Remote control and batteries Password Protected Sticker VGA computer cable Power cord PDF User's Guide CD-ROM Projector software CD-ROM Save all packaging in case you need to ship the projector. Always use the original packaging (or equivalent
  • Epson PowerLite 822 | User's Guide - Page 12
    Video) ports Audio 1 and 2 input ports Remote control sensor Speaker Audio Out port Monitor Out port (for Computer1 port output only) Power RS-232C inlet serial port Rear adjustable foot Bottom Holes for ceiling mount bracket Air filter Hole for ceiling mount bracket Security lock slot
  • Epson PowerLite 822 | User's Guide - Page 13
    Control Panel Turns projector on and off Opens menu system Indicate projector status Up/down arrows you need an S-Video cable. One is usually provided with your video device or you can purchase it from Epson. See page 14. ■ To receive a component video signal from a VCR or other video device, you
  • Epson PowerLite 822 | User's Guide - Page 14
    purchase a replacement remote control, call (562) 276-4394 (U.S.) or (905) 709-3839 (for dealer referral in Canada). Optional Accessories To enhance your use of the projector, Epson provides the following optional accessories: Product Replacement lamp Air filter set (includes 2 filters) Component
  • Epson PowerLite 822 | User's Guide - Page 15
    a computer or video source. You can connect up to four devices simultaneously: four video sources, or two computer and two video sources. You'll find instructions for the following in this chapter: ■ Positioning the projector ■ Connecting to a computer ■ Connecting to video sources 15
  • Epson PowerLite 822 | User's Guide - Page 16
    Distance Calculator program from the Drivers and Downloads section of Epson's web site: www.epson.com/support Positioning the Projector Before connecting the projector, you need to decide where to place it. If you're setting up the projector yourself and it isn't already installed in the room you
  • Epson PowerLite 822 | User's Guide - Page 17
    about Auto Keystone correction. If necessary, you can adjust the image shape manually as described on page 40. Other Installations You can also project from behind the screen or from the ceiling, with the projector mounted upside-down: Rear projection (using a translucent screen) Front
  • Epson PowerLite 822 | User's Guide - Page 18
    note If you have an iBook with an RCA video-out port, follow the instructions for connecting to a video device on page 25. Connecting to a Computer You can connect the projector to any computer that has a standard VGA or BNC monitor port, including PC notebook and laptop computers, Macintosh
  • Epson PowerLite 822 | User's Guide - Page 19
    connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the Source Search button on the projector or remote control. See page 36. Setting Up the
  • Epson PowerLite 822 | User's Guide - Page 20
    other connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the Source Search button on the projector or remote control. See page 36. 20 Setting Up
  • Epson PowerLite 822 | User's Guide - Page 21
    sources even if you've pressed the A/V Mute button on the remote control to turn off projection on the screen. Simultaneous display is possible only when the computer is connected to the projector's Computer1 port. Make sure the projector and computer are off. Then connect the monitor's cable to the
  • Epson PowerLite 822 | User's Guide - Page 22
    the 3.5 mm stereo mini-jack audio cable to the corresponding Audio1 or Audio2 jack on the projector. Audio1 and Audio2 jacks 2. Connect the other end of the audio cable to your laptop's other connections, you can plug in your projector and turn it on. See page 34 for instructions. 22 Setting Up the
  • Epson PowerLite 822 | User's Guide - Page 23
    3. Connect the other end of the cable to your speakers. When you use external speakers with the projector, you can use the or volume buttons on the projector or the Vol- and Vol+ buttons on the remote control to adjust the volume. First, you need to select the maximum volume on the external speakers
  • Epson PowerLite 822 | User's Guide - Page 24
    the optional Epson component-to-VGA video cable. See page 28. After connecting your video device to the projector, you may want to connect an audio cable to play sound from your video equipment through the projector's built-in speaker or external speakers. See page 29 for instructions. 24 Setting
  • Epson PowerLite 822 | User's Guide - Page 25
    connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the Source Search button on the projector or remote control. See page 36. Setting Up the
  • Epson PowerLite 822 | User's Guide - Page 26
    other connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the Source Search button on the projector or remote control. See page 36. 26 Setting Up
  • Epson PowerLite 822 | User's Guide - Page 27
    , you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select Computer 1 or Computer 2 as the source after projection starts by pressing the Source Search button on the projector or remote control. See page 36. Setting Up
  • Epson PowerLite 822 | User's Guide - Page 28
    other connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to your projector, select Computer1 or Computer2 as the source by pressing the Source Search button on the projector or the remote control. See page 36. 28 Setting Up
  • Epson PowerLite 822 | User's Guide - Page 29
    W. You can play sound from your video equipment through the projector's speaker if your video device has an audio output port. coded audio output port on your video source. If you don't need to make any other connections, you can plug in your projector and turn it on. See page 34 for instructions
  • Epson PowerLite 822 | User's Guide - Page 30
    to the L-Audio-R jacks on the projector. L-Audio-R jacks 2. Connect the other end of the audio adapter cable to your video device's audio output port. If you don't need to make any other connections, you can plug in your projector and turn it on. See page 34 for instructions. 30 Setting Up the
  • Epson PowerLite 822 | User's Guide - Page 31
    3. Connect the other end of the cable to your speakers. When you use external speakers with the projector, you can use the or volume buttons on the projector or the Vol- and Vol+ buttons on the remote control to adjust the volume. First, you need to select the maximum volume on the external speakers
  • Epson PowerLite 822 | User's Guide - Page 32
    32 Setting Up the Projector
  • Epson PowerLite 822 | User's Guide - Page 33
    give your presentation. Although you can operate the projector without it, the remote control lets you use additional features. See Chapter 3 for instructions on using the remote. This chapter covers the following: ■ Turning on the projector and other equipment ■ Adjusting the image ■ Adjusting the
  • Epson PowerLite 822 | User's Guide - Page 34
    pieces of connected equipment, you may have to select the image source manually. See page 36. Turning On the Projector Follow these steps to plug in and turn on the projector: 1. Open the A/V Mute slide (lens cover). 2. Connect one end of the power cord to the projector's power inlet. 34 Projecting
  • Epson PowerLite 822 | User's Guide - Page 35
    projector or on the remote control to turn it on. Power button note If you are using the remote control for the first time, be sure to insert the batteries as described on the Quick Setup poster. The projector beeps and the P Power light flashes green as the projector warms up. The projector lamp
  • Epson PowerLite 822 | User's Guide - Page 36
    want, press the Source Search button on the remote control or projector until the correct device image is projected. If a projected image fails to appear, see the next section for help. Once you see your image, turn to page 38 for instructions on focusing and making other image adjustments. What To
  • Epson PowerLite 822 | User's Guide - Page 37
    settings to make sure both the LCD screen and the external monitor port are enabled. From the Control Panel, open the Display utility. Click X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select System
  • Epson PowerLite 822 | User's Guide - Page 38
    the zoom ring to reduce or enlarge the image. Focus Zoom You can also change the image size by moving the projector closer to or farther away from the screen. You can use the E-Zoom buttons on the remote control to zoom in on a portion of the image. See page 47 for instructions. 38 Projecting
  • Epson PowerLite 822 | User's Guide - Page 39
    automatically corrects images that are distorted when the projector is tilted up or down (up to a 30° tilt). The Keystone window appears on the screen while the projector makes the correction. If the projected image still isn't rectangular, follow the instructions in the next section. Projecting 39
  • Epson PowerLite 822 | User's Guide - Page 40
    looks like or , you've placed the projector off to one side of the screen, value. Press the or buttons on the projector to correct the shape of the image. for instructions. You can also make keystone adjustments using the projector's Settings Control option in the Settings menu. (See page 57.)
  • Epson PowerLite 822 | User's Guide - Page 41
    right, or it doesn't fit properly on the screen, press the Enter button on the projector or the Enter/Auto button on the remote control. This automatically resets the projector's tracking, sync, resolution, and position settings. You must be projecting a computer image for this button to have any
  • Epson PowerLite 822 | User's Guide - Page 42
    button on the projector or remote control. You see this confirmation message: (If you don't want to turn it off, press any other button or wait a few seconds until it disappears.) 3. Press the P Power button again. The projector beeps twice, the lamp is turned off, and the P Power light turns orange
  • Epson PowerLite 822 | User's Guide - Page 43
    front or back of the projector or at the screen (the projector's front sensor can detect signals bounced off the screen). Press the button for the function you want to use. This chapter covers the following information: ■ Controlling the picture and sound ■ Replacing the remote control batteries 43
  • Epson PowerLite 822 | User's Guide - Page 44
    to more than one computer and/or video source, you can use the Source Search button on the projector or remote control to switch between the different sources. Source Search button After you select a source, the screen goes dark for a moment before the image appears. The name
  • Epson PowerLite 822 | User's Guide - Page 45
    environment in which you're projecting it. Press the Color Mode button on the remote control. If you're projecting computer or RGB video images, the default color mode . You can also use the projector menu system to change the color mode in the Image menu (see page 53). Using the Remote Control 45
  • Epson PowerLite 822 | User's Guide - Page 46
    Turning Off the Picture and Sound Press the A/V Mute button on the remote control or use the A/V Mute slide on the projector to turn off the image and sound and darken your screen. This is useful if you paused it. To restart the action, press the Freeze button again. 46 Using the Remote Control
  • Epson PowerLite 822 | User's Guide - Page 47
    If you're projecting a widescreen format image, you can use the Aspect button on the remote control to change the aspect (width to height) ratio from 4:3. You can change video images aspect ratio using the projector's Signal menu. See page 54 for details. Aspect button Using the Remote Control 47
  • Epson PowerLite 822 | User's Guide - Page 48
    button being pressed more than 30 seconds. This conserves battery life. It can be helpful, for example, when the remote is in a carrying case and the P Power button is accidentally pushed. Replacing the Batteries The remote control uses two AA alkaline batteries. Follow these steps when you need to
  • Epson PowerLite 822 | User's Guide - Page 49
    433 You can use the Menu button on the projector or remote control to access on-screen menus to adjust the image, input signal ■ Customizing projector features ■ Selecting projector setup options ■ Viewing lamp usage and other information ■ Using the projector's security features ■ Restoring
  • Epson PowerLite 822 | User's Guide - Page 50
    images. See page 54. ■ The Settings menu lets you customize the way you use the projector. It allows you to adjust the volume and keystone correction, set lamp brightness to high or low, control use of the remote control receivers, project a test pattern for adjustments, and disable buttons on the
  • Epson PowerLite 822 | User's Guide - Page 51
    available depend on which source is selected.) 4. After highlighting the option you want to adjust, use the left or right arrow buttons on the projector or the remote control to change the setting. In some cases, you may have to press the Enter button to see a sub-screen for changing the setting
  • Epson PowerLite 822 | User's Guide - Page 52
    bar. To select from two or more settings, use the up or down arrow buttons on the projector or the remote control to highlight the desired setting, then press Enter. 5. Press the Esc button to return to the (analog-RGB) and RGB video Component, composite, and S-Video 52 Fine-tuning the Projector
  • Epson PowerLite 822 | User's Guide - Page 53
    intensity of the image colors. note You can also select High or Low brightness mode in the Settings menu. See page 57. Fine-tuning the Projector 53
  • Epson PowerLite 822 | User's Guide - Page 54
    press Esc or Menu. Your settings are automatically saved. Adjusting the Input Signal Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to manually select it. You can also change the position of the projected image, correct tracking and
  • Epson PowerLite 822 | User's Guide - Page 55
    more information. ■ Sync (computer images) Corrects fuzziness or screen flicker by synchronizing the projector with the tracking signal sent from the computer. See page 86 for more information. the Enter/Auto button on the remote control to restore the default settings. Fine-tuning the Projector 55
  • Epson PowerLite 822 | User's Guide - Page 56
    or supertitles. 4. When you're finished, press Esc or Menu. Customizing Projector Features The Settings menu lets you customize the way you use the projector, from adjusting volume and lamp brightness to applying security controls. 1. Press the Menu button. 2. Select the Settings menu. 56 Fine
  • Epson PowerLite 822 | User's Guide - Page 57
    when you're projecting from the ceiling or using rear projection.) Select On or Off. ■ Operation Lock Disables all projector buttons (Full Lock) or all the buttons except the P Power button (Operation Lock). You can still operate the projector from the remote control. Changes to this setting take
  • Epson PowerLite 822 | User's Guide - Page 58
    Setup Options Use the Extended menu to customize the way you set up the projector. You can configure the projector for rear and/or ceiling projection, change the language for the menus and messages, set the screen background color, capture and store a custom image or logo for the startup screen
  • Epson PowerLite 822 | User's Guide - Page 59
    to Rear/Ceiling, press and hold the A/V Mute button on the remote control for five seconds. ■ Operation Direct Power On: When this feature is enabled, projection starts as soon as you plug in the power cord. You don't have to press the P Power button. Sleep Mode: When enabled, the projector turns
  • Epson PowerLite 822 | User's Guide - Page 60
    ■ Standby Mode Select Network On to allow the projector to be monitored over a network when the projector is in standby mode (the P Power light is orange). ■ Language Select the language to be used for the projector menus. 4. When you're finished, press Esc or Menu. Selecting Network Settings For
  • Epson PowerLite 822 | User's Guide - Page 61
    signal setting. ■ Resolution (computer, RGB video, and component video) Displays the input resolution. ■ Video Signal (composite and S-Video) Displays the video signal format. note The lamp usage timer doesn't register until you've used the lamp for at least 10 hours. Fine-tuning the Projector 61
  • Epson PowerLite 822 | User's Guide - Page 62
    by the service technician. ■ Status Displays informations about projector problems. This information may be needed if service is required. one touches the projector's buttons while you're using the remote control. ■ Install an anti-theft lock. If you create a user's logo for the projector, you can
  • Epson PowerLite 822 | User's Guide - Page 63
    's operation is locked and you'll need to disconnect the power cord, then reconnect it to redisplay the password screen. If an incorrect password is entered 30 times in a row, the projector is locked and you'll need to contact Epson to unlock it. See "Where To Get Help" on page 89. If someone
  • Epson PowerLite 822 | User's Guide - Page 64
    Logo. 4. When you see a message asking if you want to use the present image as a user's logo, select Yes and press Enter. A selection box displays over the image. 5. Use the arrow buttons on the projector or remote control to select the area of the image you want to use. Once you have selected the
  • Epson PowerLite 822 | User's Guide - Page 65
    message Save image as user's logo?, select Yes and press Enter. Saving the logo takes a few moments. Do not use the projector or other sources ( user's logo, you cannot reset the logo setting to its factory default (no logo). Setting a Password 1. Press the Freeze button on the remote control
  • Epson PowerLite 822 | User's Guide - Page 66
    in a safe place in case you forget it. Turning On the Password and User's Logo 1. Press the Freeze button on the remote control for about five seconds until you see the Password Protect menu. 2. To enable the password, select Power On Protect and press Enter. Select On then press Esc. 3. To enable
  • Epson PowerLite 822 | User's Guide - Page 67
    when you turn on the projector: Use the numeric buttons on the remote control to enter the password. projector's operation will be locked. Request code xxxxx and the projector switches to standby mode for approximately 5 minutes. Write down the request code. Then disconnect the projector's power cord
  • Epson PowerLite 822 | User's Guide - Page 68
    the Operation Lock function to disable all the projector's buttons, or all the buttons except for the P Power button. 1. Press the Menu button. 2. to disable all the buttons, or Operation Lock to disable all except the P Power button. Then press Enter. 5. Select Yes and press Enter to confirm the
  • Epson PowerLite 822 | User's Guide - Page 69
    see page 77 for instructions on resetting the lamp timer. To reset most projector menu settings, select Reset All and press the Enter button to display the confirmation screen. Select Yes to reset all the default settings or No to cancel. note The Computer Input (1 and 2), User's Logo, Network menu
  • Epson PowerLite 822 | User's Guide - Page 70
    70 Fine-tuning the Projector
  • Epson PowerLite 822 | User's Guide - Page 71
    turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in this User's Guide. Refer all other
  • Epson PowerLite 822 | User's Guide - Page 72
    prevent proper ventilation and can cause overheating and damage the projector. When the filter and vent are clogged, the projector displays the message The projector is overheating. Make sure nothing is blocking the air vent, and clean or replace the air filter. 72 Maintenance and Transportation
  • Epson PowerLite 822 | User's Guide - Page 73
    Turn off the projector, allow it to cool down, and unplug the power cord. 2. To clean the filter and vent, Epson recommends using a small the air filter to clean both sides. Vent Air filter If the dirt is difficult to remove or if the filter is torn, replace it. Contact your dealer or call Epson at
  • Epson PowerLite 822 | User's Guide - Page 74
    your dealer or call Epson at (800) 463-7766 for a replacement lamp. Request part number V13H010L42. Follow these steps to replace the lamp: 1. Press the P Power button twice to turn off the projector. When you hear the projector beep twice, unplug the power cord. 2. If the projector has been on
  • Epson PowerLite 822 | User's Guide - Page 75
    screwdriver included with the replacement lamp or a #2 Phillips-head screwdriver to loosen the screw holding the lamp cover (the lamp cover is located on top of the projector). 4. Slide the cover out, then lift it off. 5. Use the screwdriver to loosen the two screws holding the lamp in place. (You
  • Epson PowerLite 822 | User's Guide - Page 76
    not properly installed or the cover is loose, the lamp will not turn on. 9. Lower the lamp cover into place. (The opening should be almost covered, and the top of the cover should be flush with the top of the projector.) Then slide the cover closed and tighten the screw. 10. Reset the
  • Epson PowerLite 822 | User's Guide - Page 77
    Timer You must reset the lamp timer after replacing the lamp to clear the Replace the Lamp warning message. Follow these steps: 1. Connect the power cable and turn on the projector. 2. Press the Menu button on the remote control or projector and select the Reset menu. Then press Enter. note Do not
  • Epson PowerLite 822 | User's Guide - Page 78
    note Epson shall not be liable for any damage incurred during transportation. Transporting the Projector The projector contains many glass and precision parts. If you need to transport it, please follow these packing guidelines to prevent damage to the projector: ■ When shipping the projector for
  • Epson PowerLite 822 | User's Guide - Page 79
    the projector's on-screen help system ■ What to do when the projector's status lights flash ■ Solving problems with the image or sound ■ Solving password problems ■ Solving problems with the remote control ■ Solving problems monitoring the projector over a network ■ Contacting technical support 79
  • Epson PowerLite 822 | User's Guide - Page 80
    The lights on top of the projector indicate the projector's status and let you know when a problem occurs. Power light Lamp light Temperature light If the projector is not working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this does not
  • Epson PowerLite 822 | User's Guide - Page 81
    72. If these suggestions don't work, contact Epson. Replace the lamp with a new one as soon as possible; see page 74 for instructions. If you continue to use the lamp, there is a risk it may break. There is a problem with the fan or a sensor. Clean the air filter and air vents; see page 72. If this
  • Epson PowerLite 822 | User's Guide - Page 82
    Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the P Power light is green, not flashing, and the A/V Mute slide is open. Also press the A/V Mute button on the remote control to see if the picture was turned off temporarily. ■ If the projector doesn't turn on,
  • Epson PowerLite 822 | User's Guide - Page 83
    , as described in Chapter 1. ■ Make sure the power to your computer or video source is turned on. ■ If you've connected a computer and one or more video sources, you may need to press the Source Search button on the projector or the remote control to select the correct source. Allow a few seconds
  • Epson PowerLite 822 | User's Guide - Page 84
    on the remote control. If remote control to select a different aspect ratio (4:3, 16:9, or another available setting). ■ Make sure your computer's resolution setting is correct and dual display is not activated. Ideally, it should be 1024 × 768 to match the projector's native resolution projector
  • Epson PowerLite 822 | User's Guide - Page 85
    Enter/Auto button on the remote control or the Enter button on the projector to adjust tracking and sync automatically. If that doesn't work, try adjusting the Sync and Tracking settings in the Signal menu. See page 55. The image is blurry. ■ Adjust the focus using the focus ring. See page 38. ■ Try
  • Epson PowerLite 822 | User's Guide - Page 86
    remote control to automatically reset the projector's tracking and sync settings. ■ If necessary, you can manually 53 for instructions. ■ If you're See page 53 for instructions. ■ Adjust the Brightness lamp may be nearing time for replacement. Check the lamp hours as described on page 61 and replace
  • Epson PowerLite 822 | User's Guide - Page 87
    may be selected. Press the Source Search button on the projector or the remote control. Solving Password Problems You have forgotten the password. ■ Write down the request code that appears in the Password Protect Release screen and contact Epson. See page 89. ■ If you turned on the password protect
  • Epson PowerLite 822 | User's Guide - Page 88
    another button for normal operation. ■ The remote control batteries may not be installed correctly or may be low on power. Replace the batteries as described on page 48. ■ Dim the room lights and turn off any fluorescent lights. Make sure the projector is not in direct sunlight. Strong lighting
  • Epson PowerLite 822 | User's Guide - Page 89
    Get Help Epson provides these technical support services: Internet Support Visit Epson's support website for solutions to common problems with the PowerLite 822+ or PowerLite 83+. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions
  • Epson PowerLite 822 | User's Guide - Page 90
    note To purchase a replacement remote control, call (562) 276-4394 (U.S.) or (905) 709-3839 (for dealer referral in Canada). Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is
  • Epson PowerLite 822 | User's Guide - Page 91
    (available for Windows only) to see your projector's status, switch image sources, and control basic settings. ■ Use the mail notification function to receive e-mail alerts about possible problems. To use the software to manage your projectors, first install EMP Monitor. Then connect and configure
  • Epson PowerLite 822 | User's Guide - Page 92
    the projector from a remote location. The Epson Projector Software CD-ROM includes EMP Monitor for monitoring the projector from a remote location. Install, then follow the on-screen instructions to install your projector software. 4. When installation is complete, click Exit. 92 Monitoring the
  • Epson PowerLite 822 | User's Guide - Page 93
    these steps to connect the projector to your network and configure it with an IP address. 1. Connect the projector to your network using a commercially available 100BaseTX or 10BaseT network cable. Connect the cable to the LAN port on the projector. 2. Press the projector's P Power button to turn it
  • Epson PowerLite 822 | User's Guide - Page 94
    Network Settings Follow the instructions in this section to set up the projector's network settings in the remote control. ■ PJLink Password Lets you enter a password for using the PJLink™ protocol to control the projector. ■ Web Control Password Lets you enter a password for accessing the projector
  • Epson PowerLite 822 | User's Guide - Page 95
    you an e-mail alert if it has any problems. For instructions on setting up e-mail alerts, see the next section. ■ Projector Name Enter a name for identifying the projector over the network. Using Projector E-mail Alerts When this feature is enabled, the projector sends you an e-mail alert if it has
  • Epson PowerLite 822 | User's Guide - Page 96
    the specified addresses with the subject line EPSON Projector and the following information: ■ Line 1: The name of the projector where the problem has occurred ■ Line 2: The IP address of the projector where the problem has occurred ■ Line 3: Details of the problem note If you want to monitor the
  • Epson PowerLite 822 | User's Guide - Page 97
    the Refresh button. The following table describes the EMP Monitor status icons. Group status icons No warnings or problems in the projector group. Warning or problem in a projector in the group. Monitoring disabled. Right click the icon and select Monitoring Enabled to begin monitoring the group
  • Epson PowerLite 822 | User's Guide - Page 98
    ; see page 58). Network error (Esc/VP.net communication error). Power status icons The projector is powered on; normal status. The projector is powered off; normal status. The projector is powered on; abnormal status. The projector is powered off; abnormal status. Temperature level status icons The
  • Epson PowerLite 822 | User's Guide - Page 99
    incorrectly. Low air flow. The air filter needs to be cleaned or replaced. Air flow sensor error. Contact Epson as described on page 89. Lamp cover door open. Close the lamp cover door. Lamp out. The lamp has reached the end of its life. Lamp failure at power on. The lamp has reached its end of life
  • Epson PowerLite 822 | User's Guide - Page 100
    may not be possible for it to report the error. Using E-mail Alerts You can set up e-mail alerts to warn you of problems with the projector. 1. Open EMP Monitor. 2. From the Tool menu, select Mail notification function. 3. Turn the Mail notification function setting On. 4. Enter the IP address and
  • Epson PowerLite 822 | User's Guide - Page 101
    change the User's Logo, High Altitude Mode, and Language settings in the Extended menu or select the Reset All and Reset Lamp Hours in the Reset menu Use the controls at the bottom of the screen to choose a source, stop the action, turn off the picture and sound, or turn the projector's power on or
  • Epson PowerLite 822 | User's Guide - Page 102
    102 Monitoring the Projector Over a Network
  • Epson PowerLite 822 | User's Guide - Page 103
    Resolution Color reproduction Brightness (ANSI) PowerLite 822+ Brightness (ANSI) PowerLite 83+ Contrast ratio Image size Projection distance Projection methods Focus 7.6 meters) 2.7 to 34 feet (0.9 to 10.4 meters) Front, rear, ceiling Manual Manual 10 W monaural 4:3 (horizontal:vertical) 1:1.2 103
  • Epson PowerLite 822 | User's Guide - Page 104
    brightness mode) 28 dB (Low brightness mode) ± 30° vertical (maximum) Projection Lamp Power consumption 170 W UHE Lamp life About 3000 hours (High brightness); 4000 hours (Low brightness) Remote Control Range 20 feet (6 meters) Batteries (2) Alkaline AA Dimensions Height (including feet
  • Epson PowerLite 822 | User's Guide - Page 105
    Safety and Approvals United States FCC Part15B Class B (DoC) UL60950-1 Canada ICES-003 Class B CSA C22.2 No. 60950-1 Pixelworks™ DNX™ ICs are used in this projector. Technical Specifications 105
  • Epson PowerLite 822 | User's Guide - Page 106
    Compatible Video Formats You can use any of the following video sources: VCR, DVD player, camcorder, digital camera, or gaming console. The projector supports composite video, S-Video, component video, and RGB video, and it automatically senses the video format (HDTV, SDTV, NTSC, PAL, or SECAM). The
  • Epson PowerLite 822 | User's Guide - Page 107
    series systems, and high-end workstations such as the Sun® SPARCstation™ . Although images are displayed at the projector's native resolution of 1024 × 768 pixels, Epson's patented SizeWise chip supports Color LCD dialog box is selected, then click the Display tab and select a compatible resolution.
  • Epson PowerLite 822 | User's Guide - Page 108
    The projector supports these monitor display formats: Mode VGA EGA VGA-60 VESA-72 VESA-75 VESA-85 VGA-120 SVGA- 56 60 72 75 85 120 60 70 75 85 120 70 75 85 120 60 75 85 60 75 85 60 75 85 60 Resolution 640 × 350 640 × 480 640 × 480 640 × 480 640 × 480 640 × 480 800 × 600 800 × 600 800 × 600 800 ×
  • Epson PowerLite 822 | User's Guide - Page 109
    ) SDTV (576p) HDTV (720p) HDTV (1080i) Refresh Rate (Hz) 117 95 75 67 75 59 75 75 60 50 60 50 50/60 50/60 Resolution 640 × 480 800 × 600 1024 × 768 640 × 480 832 × 624 1024 × 768 1024 × 768 1152 × 870 720 × 480 720 × 576 720 × 480 720 × 576 1280
  • Epson PowerLite 822 | User's Guide - Page 110
    110 Technical Specifications
  • Epson PowerLite 822 | User's Guide - Page 111
    about your PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near water or sources of heat. ■ Use the type of power source
  • Epson PowerLite 822 | User's Guide - Page 112
    refer servicing to qualified service personnel under the following conditions: When the power cord or plug is damaged or frayed. If liquid has been spilled into the projector, or if it has been exposed to rain or water. If it does not operate normally when you follow the operating instructions, or
  • Epson PowerLite 822 | User's Guide - Page 113
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If
  • Epson PowerLite 822 | User's Guide - Page 114
    114 Notices
  • Epson PowerLite 822 | User's Guide - Page 115
    to 14, 90 Camcorder, connecting to, 24 to 31 Carrying case, optional, 78 Ceiling mount, 14, 17 projection, 17, 59 Cleaning air filter and vents, 72 to 74 lens, 72 projector case, 72 Color adjusting, 45, 52 to 54 problems, 86 specifications, 103 Color Adjustment setting, 54 Color Mode, 45, 53 Color
  • Epson PowerLite 822 | User's Guide - Page 116
    to 60 External monitor, connecting, 21 Extra Care Road Service, 10 E-Zoom button, 47 F FCC compliance statement, 113 Filter, cleaning and replacing, 72 to 74 Focusing, 38 Foot release lever, 39 Freeze button, 46 Front projection, 16 to 17, 59 Front/Ceiling setting, 17, 59 Full Lock setting, 57, 68
  • Epson PowerLite 822 | User's Guide - Page 117
    User's Logo, 64 to 65 using, 50 to 52 Messages setting, 58 Monitor, external, 21 Monitoring projector e-mail notifications, 95 to 96, 100 EMP Monitor, 96 to 100 with browser, 101 Moving projector, 78 N Network connecting to, 93 managing projector remotely, 91 to 101 menu, 50, 60, 94 to 96 problems
  • Epson PowerLite 822 | User's Guide - Page 118
    82, 88 Replacing air filter, 72 to 74 lamp, 74 to 77 remote control, 14, 90 remote control batteries, 48 Request code, password, 67 Reset menu, 50, 69 Resolution, 7, 61, 103, 107 to 109 S Safety approvals, 105 instructions, 111 to 112 Screen logo, see User's Logo Screen, distance from projector, 16
  • Epson PowerLite 822 | User's Guide - Page 119
    45, 53 Timer, lamp, 77 Tint setting, 54 Tracking, adjusting, 55, 85 to 86 Transporting projector, 78 Troubleshooting color, 86 cut-off image, 41, 84 image quality, 85 to 86 image shape, 84 network problems, 89 no image, 82 to 83 no sound, 87 password, 87 remote control problems, 88 Turning off audio
  • Epson PowerLite 822 | User's Guide - Page 120
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
PowerLite
®
822+/83+
Multimedia Projector
User’s Guide