Epson PowerLite 9300i User's Guide - Page 102
Replacing the Filters, Remove each filter from its holder by releasing the two tabs,
View all Epson PowerLite 9300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Replacing the Filters 1. Turn the projector over (unless it's ceiling-mounted). 2. Remove the filters from the projector by sliding them out to the sides. 3. Remove each filter from its holder by releasing the two tabs, as shown. 4. Install new filters in the holders, aligning the tabs with the slots on each side. 2 Tabs 1 5. Slide the assembled filters back into the projector. 102 Maintaining the Projector
102
Maintaining the Projector
Replacing the Filters
1.
Turn the projector over (unless it’s ceiling-mounted).
2.
Remove the filters from the projector by sliding them out to the
sides.
3.
Remove each filter from its holder by releasing the two tabs, as
shown.
4.
Install new filters in the holders, aligning the tabs with the slots on
each side.
5.
Slide the assembled filters back into the projector.
1
2
Tabs