Epson PowerLite 9300i User's Guide - Page 54
Replacing the Batteries, caution
View all Epson PowerLite 9300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
caution When replacing batteries, take the following precautions: ■ Replace the batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash immediately. ■ Do not expose batteries to heat or flame. ■ Dispose of used batteries according to local regulations. ■ Remove the batteries if you won't be using the projector for a long period of time. Replacing the Batteries If the projector stops responding to the remote control, check the following: ■ Make sure the remote control's on/off switch (shown on page 50) is in the ON position. ■ Press the light button and check to see if the buttons on the remote control light up. (If you're in a bright room, you may not be able to see them light.) If the buttons do not light up, replace the batteries as described below: 1. Turn the remote control over. 2. Slide the battery compartment cover open. 3. Install two AA batteries, inserting the flat (negative) ends in first. 4. Slide the cover back in place. 54 Giving Your Presentation