Epson PowerLite S9 User's Guide - Page 37
Connecting a Component Video Source, optional component-to-VGA video cable or adapter.
View all Epson PowerLite S9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Connecting a Component Video Source If your video equipment has component video connectors (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a component-to-VGA video cable from Epson (see page 17) or an electronics dealer. 1. Connect the component end of the cable (3 male RCA) to the Y/ Cb/Cr (or Y/Pb/Pr) connectors on your device. 2. Connect the other end of the cable (HD15 male) to the Computer (Component Video) port on your projector using an optional component-to-VGA video cable or adapter. PowerLite S9 Computer (Component Video) port PowerLite 1220/PowerLite 1260 Computer (Component Video) port 3. You may need to change the Input Signal setting in the projector's Signal menu to Auto (see page 70). Setting Up the Projector 37