Epson R340 Product Information Guide - Page 4

Epson Stylus Photo R340 When printing without a computer (in stand-alone mode), select the following Paper Type settings from the printer's control panel. For this paper Epson Ultra Premium Glossy Photo Paper Epson Premium Glossy Photo Paper Epson Premium Semigloss Photo Paper Epson Semigloss Scrapbook Photo Paper Epson Premium Luster Photo Paper Epson Photo Paper Epson Glossy Photo Paper Epson Glossy Photo Greeting Cards Epson Matte Paper Heavyweight PremierArtTM Matte Scrapbook Photo Paper for Epson Plain paper Epson Photo Quality Ink Jet Paper Epson Premium Bright White Paper Select this Paper Type setting Ultra Premium Premium Glossy Semigloss Premium Luster Photo Paper Matte Plain Paper Media Loading Guidelines ❏ See page 2 for a list of Epson papers that can be used with this printer. ❏ Load paper short edge first, even when printing landscapeoriented pictures. ❏ Always handle sheets by the edges, and don't touch the printable surface. ❏ Be sure to load the printable (whiter) side of the media face up in the sheet feeder. ❏ Do not load paper higher than the arrow mark on the left edge guide. (Some papers should be loaded just one sheet at a time. Make sure you check any instructions included with the paper.) ❏ In addition to the Media Type (or Paper Type) setting, remember to select the correct Paper Size for your media. ❏ If the package includes protective sheets between the sheets of media, be sure to remove the protective sheets before printing. ❏ Some special media have a cut corner that you need to position in the upper right when loading. Note: Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. Poor quality paper may reduce print quality and cause paper jams and other problems. If you encounter problems, switch to a higher grade of paper. Do not load curled or folded paper. Use papers under these conditions: Temperature: 59 to 77 °F (15 to 25 °C) Humidity: 40 to 60% RH Store printouts on Photo Quality Glossy Film and Self Adhesive Sheets under these conditions: Temperature: 59 to 86 °F (15 to 30 °C) Humidity: 20 to 60% RH Printable area A A B-L B-R D-L D-R C single sheets/index cards E envelopes borderless (4 × 6, 5 × 7, 8 × 10, and letter-size only) A: The minimum top margin is 0.12 inch (3.0 mm). B-L: The minimum left margin is 0.12 inch (3.0 mm) B-R: The minimum right margin is 0.12 inch (3.0 mm) C: The minimum bottom margin is 0.12 inch (3.0 mm) D-L: The minimum left margin for envelopes is 0.20 inch (5.0 mm) D-R: The minimum right margin for envelopes is 0.20 inch (5.0 mm) E: The minimum bottom margin for envelopes is 0.78 inch (20 mm) ** When printing with the borderless setting, print quality may decline in the top and bottom areas of the printout, or the area may be smeared. 4 - Epson Stylus Photo R340 8/05