Epson RX500 Product Information Guide - Page 3

Printable Area, Scanning, Supported Memory Cards, Memory Card Image File Requirements - stylus photo

Page 3 highlights

EPSON Stylus Photo RX500 Printable Area A B-L B-R C Single sheets or cards Envelopes Margins Standard sheets Sheets copied with minimum margin setting Envelopes Top (A): 0.12 inch (3.0 mm) Left (B-L): 0.12 inch (3.0 mm) Right (B-R): 0.12 inch (3.0 mm) Bottom (C): 0.12 inch (3.0 mm) Top (A): 0.06 inch (1.5 mm) Left (B-L): 0.06 inch (1.5 mm) Right (B-R): 0.06 inch (1.5 mm) Bottom (C): 0.06 inch (1.5 mm) Top (A): 0.12 inch (3.0 mm) Left (B-L): 0.12 inch (3.0 mm) Right (B-R): 0.12 inch (3.0 mm) Bottom (C): 0.78 inch (20 mm) Note: Depending on the type of paper, the print quality may deteriorate in the top and bottom areas of the print, or these areas may be smeared. Before printing large jobs using an extended margin setting, print a single sheet to confirm print quality. You can create borderless prints using certain special EPSON papers. See the User's Guide for more information. Scanning Scanner type Photoelectric device Effective pixels Document size Scanning resolution Output resolution Flatbed color image scanner Color CCD line sensor 20,400 × 28,080 pixels at 2400 dpi, 100% Letter (8.5 × 11.0 inches) or A4 (8.5 × 11.7 inches); reading area is selectable with software 2400 dpi (main), 4800 dpi (sub) 50 to 6400 dpi (adjustable in one-dpi increments; resolutions higher than 4800 are interpolated by software) Color separation Image data Gamma correction Light source Interface RGB color filters on CCD 16 bits per pixel per color input 1 to 16 bits per pixel per color output 48 bits total User defined 2 level White cold cathode fluorescent lamp USB 2.0 High Speed Supported Memory Cards Slot A Slot B Slot C Memory Stick® Memory Stick PRO MagicGate Memory Stick SD (Secure Digital) Card MMC (MultiMediaCard) Memory Stick Duo miniSD Card (adapter required) SmartMedia™ (maximum 128MB; standard 2000 compliant) xD-Picture Card CompactFlash™ Type I and Type II IBM® Microdrive™ Slot A Slot B Memory card light Slot C Memory Card Image File Requirements File format JPEG or TIF format image files, DOS FAT taken with a DCF version 1.0 compliant digital camera (supports Exif Print v. 2.1 and 2.2) Media format DCF (Design rule for Camera File system) version 1.0 compliant* Image size Vertical: 120 to 4600 pixels Horizontal: 120 to 4600 pixels Number of files Up to 999 * The DCF standard is set by the Japan Electronics and Information Technology Indistries Association (JEITA) Note: You can't print images whose file names contain double-byte characters. 10/03 EPSON Stylus Photo RX500 - 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

EPSON Stylus Photo RX500
10/03
EPSON Stylus Photo RX500
- 3
Printable Area
Margins
Standard sheets
Top (A): 0.12 inch (3.0 mm)
Left (B-L): 0.12 inch (3.0 mm)
Right (B-R): 0.12 inch (3.0 mm)
Bottom (C): 0.12 inch (3.0 mm)
Sheets copied with
minimum margin
setting
Top (A): 0.06 inch (1.5 mm)
Left (B-L): 0.06 inch (1.5 mm)
Right (B-R): 0.06 inch (1.5 mm)
Bottom (C): 0.06 inch (1.5 mm)
Envelopes
Top (A): 0.12 inch (3.0 mm)
Left (B-L): 0.12 inch (3.0 mm)
Right (B-R): 0.12 inch (3.0 mm)
Bottom (C): 0.78 inch (20 mm)
Note:
Depending on the type of paper, the print quality may deteriorate in
the top and bottom areas of the print, or these areas may be
smeared. Before printing large jobs using an extended margin setting,
print a single sheet to confirm print quality.
You can create borderless prints using certain special EPSON papers.
See the
User’s Guide
for more information.
Scanning
Scanner type
Flatbed color image scanner
Photoelectric device
Color CCD line sensor
Effective pixels
20,400
×
28,080 pixels at 2400 dpi,
100%
Document size
Letter (8.5 × 11.0 inches) or A4
(8.5 × 11.7 inches); reading area is
selectable with software
Scanning resolution
2400 dpi (main), 4800 dpi (sub)
Output resolution
50 to 6400 dpi (adjustable in one-dpi
increments; resolutions higher than
4800 are interpolated by software)
Color separation
RGB color filters on CCD
Image data
16 bits per pixel per color input
1 to 16 bits per pixel per color output
48 bits total
Gamma correction
User defined 2 level
Light source
White cold cathode fluorescent lamp
Interface
USB 2.0 High Speed
Supported Memory Cards
Slot A
Memory Stick
®
Memory Stick PRO
MagicGate Memory Stick
SD (Secure Digital) Card
MMC (MultiMediaCard)
Memory Stick Duo
miniSD Card (adapter required)
Slot B
SmartMedia
(maximum 128MB;
standard 2000 compliant)
xD-Picture Card
Slot C
CompactFlash
Type I and Type II
IBM
®
Microdrive
Memory Card Image File Requirements
File format
JPEG or TIF format image files,
DOS FAT taken with a DCF
version 1.0 compliant digital camera
(supports Exif Print v. 2.1 and 2.2)
Media format
DCF (Design rule for Camera File
system) version 1.0 compliant*
Image size
Vertical: 120 to 4600 pixels
Horizontal: 120 to 4600 pixels
Number of files
Up to 999
*
The DCF standard is set by the Japan Electronics and Information Technology
Indistries Association (JEITA)
Note:
You can’t print images whose file names contain double-byte
characters.
A
B-L
B-R
C
Single sheets or cards
Envelopes
Slot B
Slot A
Memory
card light
Slot C