Epson RX500 Product Information Guide - Page 4
Mechanical, Electrical, Environmental, Interface, Safety Approvals, Loading Paper, Single Sheets - stylus photo all in one
UPC - 010343848467
View all Epson RX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
EPSON Stylus Photo RX500 Mechanical Paper feed method Paper path Sheet feeder capacity Dimensions Weight Friction Sheet feeder, top feed Approx. 80 sheets at 24 lb (90 g/m2) 17.7 × 23.3 × 11.9 inches (W × D × H) 449.6 × 592 × 302.3 mm (W × D × H) Approx. 19.21 lb (8.7 kg) Electrical Input voltage range* 108 to 132 V Rated frequency range 50 to 60 Hz Rated current 0.8 A Power consumption Approx. 21 W (ISO 10560 Letter Pattern) Approx. 4.0 W in sleep mode Approx. 0.4 W in power-off mode * Check the label on the back of this product for voltage information Environmental Temperature Operation 50 to 95 °F (10 to 35 °C) Storage* - 4 to 140 °F (- 20 to 60 °C) 1 month at 104 °F (40 °C) Transit* - 4 to 140 °F (- 20 to 60 °C) 120 hours at 140 °F (60 °C) Humidity (without condensation) Operation 20 to 80% RH Storage* 5 to 85% RH * Stored in shipping container Interface Standard Bit rate Data encoding Connector Recommended cable length Based on Universal Serial Bus Specifications Revision 2.0, Universal Serial Bus Device Class Definition for Printing Devices version 1.1 480 Mbps (high speed device) NRZI USB Series B 6.6 feet (2 meters) Safety Approvals Safety standards EMC UL 60950, CSA C22.2 No. 60950 FCC part 15 subpart B class B CSA C108.8 class B Loading Paper Single Sheets 1. Open the output tray. Output tray 2. Pinch the sides of the left edge guide together as you slide the guide all the way to the left. 3. Flip the feeder guard forward. Feeder guard 4. Insert your paper against the right edge of the sheet feeder. Then pinch the sides of the left edge guide together as you slide it against the paper (but not too tightly). 5. Lower the feeder guard back over the paper. Also be sure to: ❏ Load the printable side face-up. It's often whiter or brighter than the other side. ❏ Load letterhead or preprinted paper top edge first. ❏ Load paper short-edge first, even for landscape-oriented documents and photos. ❏ Don't load paper above the arrow on the left edge guide. ❏ Load up to approximately 80 sheets of plain paper at a time. ❏ If the paper has a cut corner, position it in the upper right corner as you load it in the sheet feeder. 4 - EPSON Stylus Photo RX500 10/03