Epson Runsense SF-710 User Manual - Page 46
Setting a pace
View all Epson Runsense SF-710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Measuring your workouts Setting a pace You can use the Target Pace function to sound an alarm if you fall behind your preset pace. Set your target time per one mile or kilometer (your target pace) and the range at which the alarm sounds when you fall behind that target pace. 2 Hold down B on the Measurement screen to display the Measure set. menu. 3 Press C or D to highlight Target Pace, then press A. ̇ ̇ ̇ Note: You can also adjust the Target Pace function from the Run Connect PC application. See "Setting the Target Pace Function (SF-710 only)" on page 74. 4 Press C or D to highlight an entry, then press A. 1 Press C on the Time screen to display the Measurement screen. GPS positioning starts, and the Measurement screen is displayed once positioning is complete. 5 Press C or D to set your target pace per mile or kilometer, then press A. Hold down C or D to quickly scroll through the settings. See "GPS Positioning" on page 18. 45