Epson Runsense SF-710 User Manual - Page 64
Enabling heart rate monitoring, See GPS Positioning
![]() |
View all Epson Runsense SF-710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Measuring heart rate Enabling heart rate monitoring When using the heart rate chest strap, you need to set the HR setting to ON from the Measure set. menu. Operation buttons 4 Press C/D to select ON, and then press A. 1 Press C on the Time screen to display the Measurement screen. GPS positioning starts, and the measurement screen is displayed once positioning is complete. 5 Use C/D to select the heart rate zone that you want to maintain while exercising, and then press A.. An alarm sounds if you are outside the set heart rate zone. See "GPS Positioning" on page 18. 2 Hold down B on the Measurement screen to display the Measure set. menu. . Note: O You can check or change the heart rate in each heart rate zone in User Settings. See "General settings" on page 82. O To turn off the alarm, select OFF in Select Zone. 6 Confirm the settings and press A. 3 Press C/D to select HR, and then press A. 7 Hold down A to return to the Measurement screen. Note: When HR is set to ON, the battery life for the device is reduced. When you are not using the heart rate monitor, make sure HR is set to OFF. 63
![](/manual_guide/products/epson-sf510-user-manual-b696707/64.png)