Epson StoryTeller 8x10 20 pages Creating a Photo Book - Page 70
Printing a Full-Length Cover, against the right
View all Epson StoryTeller 8x10 20 pages manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Printing a Full-Length Cover See your printer documentation for detailed paper loading and printing instructions. Your printer may not load from the top, as described here, and your printer software may look different. Note: Avoid touching the glossy surface of the StoryTeller paper as much as possible to avoid fingerprints. 1 Before loading the StoryTeller cover sheet in your printer, flatten it by gently bending it in the opposite direction (for example, at the flaps and spine). 2 Load the sheet glossy side up against the right side of the feeder. Note: If your printer loads from the front like an HP printer, load the paper glossy side down. 3 Slide the left edge guide up against the paper, but not too tightly. 4 Lower the output tray and pull out the output tray extensions, if your printer has them. 70 Print Your Cover