Epson Stylus NX510 Quick Guide - Page 36
to begin charging the ink. This takes, about 2 minutes. When you see a completion - cartridge
View all Epson Stylus NX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
7. Insert the new ink cartridge into the holder and push it down until it clicks into place. 8. Once you replace all the cartridges that need replacing, close the cartridge cover and push it down until it clicks into place. 9. Close the scanner. 10. Press OK to begin charging the ink. This takes about 2 minutes. When you see a completion message on the display screen, ink charging is finished. Caution: Never turn off your Epson printer while ink is charging or you'll waste ink. If you see an ink replacement message on the display screen, press OK and press down all the cartridges securely. Then press OK again. Note: If you replaced a cartridge while copying a document or photo, cancel printing and make sure your original is still placed correctly on the scanner glass. Then copy your original again. If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge. 36 Maintaining Your Printer