Epson SureColor F6200 User Manual - Page 55
Ink and Chip Unit Precautions, Check Ink Levels, Refill Ink Tank, Parent topic, Related tasks
View all Epson SureColor F6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
You will be unable to print if a chip unit needs to be replaced. If the Check Ink Levels message is displayed during a print job, the print job pauses while you refill the ink and replace the chip unit. You can use the same procedure to refill the ink and replace chip units for all colors. Note: When the message Refill Ink Tank is displayed on the control panel screen and the remaining ink level is greater than 2.8 in. (70 mm) from the base of the ink tank, it is time to replace the ink tank. The ink tank must be replaced because fine dirt, dust, and other foreign material causes the ink tank's filter to malfunction. The ink tank replacement interval depends on the usage environment and conditions. Contact Epson Support for information on replacing components. Note: This printer has a remaining ink warning system. This system does not directly detect the amount of ink remaining in the ink tank. Instead, the amount of ink remaining is estimated based on the ink usage conditions and displayed as a message. The accuracy of this system depends on consistent and proper ink refills. If the procedure for refilling the ink and replacing the chip unit is not followed correctly, the remaining ink warning system may not function properly. To prevent this, replace the chip unit and refill the ink as soon as possible once the remaining ink level falls below 2.8 in. (70 mm) from the base of the ink tank. Parent topic: Replacing the Ink and Chip Unit Related tasks Replacing the Chip Unit and Refilling Ink Ink and Chip Unit Precautions Follow these precautions as you refill the ink in your product: • Store ink packs in a location out of the reach of children. • Wear protective eyewear and gloves when refilling ink. • Be sure to read the Safety Data Sheet (SDS) before using ink packs. You can download it from epson.com/proimaging. • Gently cut or tear off the ink pack spout seal. If you cut the ink pack spout seal too quickly, ink may splatter. • Do not squeeze open ink packs. Ink may spill. • Gently tilt the ink pack when pouring ink into the ink tank. • Do not place anything on the ink tank or subject it to strong impacts, or the ink tank could detach. • Epson recommends the use of genuine Epson ink packs. 55