Epson SureColor P400 Basics and warranty - Page 34

minutes. The, ink button to begin charging the ink. This takes about

Get Epson SureColor P400 PDF manuals and user guides View all Epson SureColor P400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

8. Insert the new cartridge into the holder and push it down until it clicks into place. 9. Once you replace all the necessary cartridges, close the cartridge cover and push it down until it clicks into place. 10. Close the printer cover. 11. Press the H ink button to begin charging the ink. This takes about 4 minutes. The P power light flashes as the ink charges. The P400 Series will shake the ink cartridges as it performs Ink Density Optimization. When the P power light stops flashing and the H ink light goes out, ink charging is finished. Caution: Never turn off the P400 Series while ink is charging or you'll waste ink. If the H ink light is flashing, press the H ink button, then press down all the cartridges securely. If you remove an expended ink cartridge, you cannot reinstall and use the cartridge. 34 Maintaining Your Printer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
34
Maintaining Your Printer
8.
Insert the new cartridge into the holder and push it down until it clicks into
place.
9.
Once you replace all the necessary cartridges, close the cartridge cover and
push it down until it clicks into place.
10.
Close the printer cover.
11.
Press the
H
ink button to begin charging the ink. This takes about
4 minutes. The
P
power light flashes as the ink charges. The P400 Series will
shake the ink cartridges as it performs Ink Density Optimization. When the
P
power light stops flashing and the
H
ink light goes out, ink charging is
finished.
Caution:
Never turn off the P400 Series while ink is charging or you’ll waste ink.
If the
H
ink light is flashing, press the
H
ink button, then press down all the
cartridges securely.
If you remove an expended ink cartridge, you cannot reinstall and use the cartridge.