Epson SureColor P8000 Designer Edition Quick Reference - Page 30
Maintaining your printer, Checking ink status, Replacing ink cartridges
View all Epson SureColor P8000 Designer Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Maintaining your printer | 29 10. To reduce or enlarge your printout or print double-sided, click the Page Layout tab and select settings as necessary. (Click Help or see your online User's Guide for details.) 11. Click OK to save your settings. 12. Click OK or Print to start printing. Maintaining your printer Follow the instructions in this section to perform basic maintenance on your printer. For detailed instructions, see the online User's Guide. Checking ink status Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start. Or you can wait until the ink is expended, replace the cartridge, and then continue the job without any loss of print quality. However, it is best to replace a low ink cartridge before starting a large print job. The easiest way to check ink levels is from the control panel LCD screen. The numbers above the ink icons on the LCD screen correspond to the 11 ink cartridge slots on the printer. The icons show the approximate amount of ink remaining. Replacing ink cartridges When the B ink light is flashing and a icon appears above a cartridge on the LCD screen, the indicated cartridge is almost expended. Make sure you have a replacement cartridge. When the B ink light stays on and the icon appears above a cartridge on the LCD screen, the cartridge is expended. You must replace the cartridge before you can continue printing. Note: Replace all expended cartridges. You cannot print if any of the slots are empty.