Epson SureColor T5270D User Manual - Page 72
Starting Copy Center, Address Settings, Mail Server Settings
View all Epson SureColor T5270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Epson SureColor T-Series User's Guide Copying and Scanning Calibration Feed Adjust Control panel ✓ ✓ Copy Center - - *1 Available only when the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been installed. *2 In the case of Scan To e-mail and Scan To Shared Folder as well, all scanned image files are saved to the hard disk of the printer. *3 Printing is limited to JPEG files saved at a directly printable resolution. Example LAN Starting Copy Center Copy Center is included on the network interface of the printer, and it functions when the Multifunction Scanner is connected to the printer. The following procedure describes how to start Copy Center. 1 Start a web browser on a tablet terminal or computer connected to the printer via the network. 2 Enter the IP address specified on the printer in the address bar, and then press the Enter key or the return key. 3 In the displayed screen, click Copy Center. The printer does not have a wireless LAN function. To connect the printer and a tablet terminal over the network, you need a wireless LAN router or wireless LAN access point. For supported operating systems and browsers, see the following section. U"System Requirements" on page 200 Address Settings To scan to e-mail or scan to a shared folder, you must configure the mail server and register the e-mail destination address and shared folder address in advance. c Important: If you use the Scan to e-mail or Scan to Shared folder functions or manage in CopyCenter without configuring the security settings, problems may occur, including the interception or falsification of information. We recommend that before you use the product, you sufficiently understand the problems that can occur during operation without configuring security settings, and then configure the security settings at your own discretion and responsibility. Mail Server Settings Use Remote Manager to configure the mail server settings (SMTP/POP3). As with Copy Center, Remote Manager is included in the network interface of this printer. 72