Epson TM-L500A Technical Reference Guide: RFID - Page 20
Power-Saving Mode, Sleep 1 & Sleep 2
View all Epson TM-L500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Power-Saving Mode The TM-L500A RFID has the power-saving mode function to reduce the power consumption. There are 3 statuses, sleeps 1, 2, and 3 in the power-saving mode. For the power consumption during standby in each sleep mode, see "Electrical Characteristics" on page 28. Sleep 1 & Sleep 2 You can set the statuses, Sleeps 1 & 2 to any of the 3 patterns in the table below with the memory switch. • Sleep 1: The printer enters this mode 10 seconds after entering standby status. • Sleep 2: The printer enters this mode 5 minutes after entering standby status. In the default setting (Pattern 1), if the printer does not operate for 10 seconds, the LEDs and the backlight of the LCD become dim, and for 5 minutes, the backlight of the LCD is turned off. They come back on when the printer operates. Patterns for sleep 1 and sleep2 No power saving Pattern 1 (initial setting) Status - Normal Sleep 1 LEDs brightness Bright Bright Dim LCD backlight brightness Bright (initial setting*1) Bright (initial setting*1) Dim*2 Pattern 2 Pattern 3 Sleep 2 Normal Sleep 1 Normal Sleep 1 Sleep 2 Dim Bright Dim Bright Bright Bright Off Bright (initial setting*1) Dim*2 Bright (initial setting*1) Dim*2 Dim*2 *1: Selectable from Bright, Dim, and Off with the control panel or the memory switch. *2: If the LCD brightness during the normal status is set to Off, the LCD does not become dim. Standby status is a status when no processing is being performed for printing or communication, and the cover is closed. When printing data is received, it is printed immediately. For details on how to set the memory switch, see "Setting the Memory Switches" on page 45. 20