Epson TM-T88V-DT Technical Reference Guide - Page 113
Attaching the Connector Cover
View all Epson TM-T88V-DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Chapter 2 Setup Attaching the Connector Cover To protect the cables, attach the connector cover in the steps below. When the optional customer display unit is not installed, attach the connector cover with the U-shaped part. WARNING Be sure to hold both sides of the connector cover when attaching it, or the it may become damaged. When pulling out the cables whose connectors do not lock themselves (USB cables and Line-Out cable) from the cable exits on the back, fix the cables with the lock wire saddle to prevent the cables from coming off. For the optional powered USB hub unit (OT-PH10), use the connector cover provided with the hub unit. 1 Pass the interface cables through the locking wire saddle on the pole mounting plate. 2 locking wire saddle 2 Pass each cable through the cable exits at the bottom of the connector cover. 113