Epson TM-T88V-DT Technical Reference Guide - Page 67
Attaching the Optional Customer Display, Setting the Customer Display - dip switch settings
View all Epson TM-T88V-DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 2 Setup Attaching the Optional Customer Display Setting the Customer Display DM-D110 (dedicated model) has the DIP switches. The functions are as follows. • Displaying self-test • Setting the communication speed (Serial communication) In normal use, you do not need to change the settings. If you change this setting, please match the setting to that of the product. When used in ePOS-Device API / XML, you need to set with EPSON TMNet WebConfig. DIP Switch Functions Remove the USB cable from the computer and remove the cover of the dip switch. If the USB cable is still connected to the computer during operation, this product may break down due to short circuit, etc. 2 If you open the DIP switch cover, be sure to close the cover after setting the DIP switch. When used without the cover, it may cause a malfunction. DSW No. Function ON OFF Default 1-1 Received Error Data Ignore Displays "?" OFF 1-2 Receive Data Length 7bit 8bit OFF 1-3 Parity With Parity No Parity OFF 1-4 Parity Selection Even Odd OFF 1-5 ON Communication Speed R e fe r t o " C o m mu n i c a t i o n S p e e d 1-6 OFF Switching Switching" 1-7 ON 1-8 Execution of Selt-Test *1 Yes No OFF *1: Executes the self-test once only when the power is tuned on. Communication Speed Switching SW1-5 ON SW1-6 ON SW1-7 ON Communication Speed (bps) 2400 67