Epson TM-T88V-DT Technical Reference Guide - Page 73

Chapter 2 Setup OS Initial Settings The following explains the procedures for setting the OS when you turn on the power for this product for the first time.  When performing setup for the OS, you need a display and a keyboard.  Connect the display when this product is off. If you connect the display when this product is on, data may not be properly displayed. 1 Check that the product's power is not on, and connect the display, keyboard, and mouse. The display can use either the VGA or the Display Port. If you are using dual display, perform separate settings. For detail, refer to "Settings for Dual Display" on page 120. 2 Turn on the product. When you turn on this product's power for the first time, the Windows Embedded 2 POS Ready 2009 setup screen is displayed for a while. 3 The login screen is displayed. Input the password. The initial settings are as follows. OS User name Windows Embedded POSReady 7 EPSON-USER Windows Embedded POSReady 2009 Administrator Password T88V-DT T88V-DT 4 The OS desktop is displayed. Select [Start], then [Control Panel], and [Date and Time]. The "Date and Time" window is displayed. Set the time, date, and the timezone. You can also set the date, time, and the timezone using EPSON TMNet WebConfig. 73