Epson TM-m30II Technical Reference Guide TM-m30II-H - Page 111
Bluetooth Interface, Setting Contents, Setting Items, Initial Settings
![]() |
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Appendix Bluetooth Interface Countries where Bluetooth can be used are limited. Since notes are provided for each country, check the sheet supplied with the product. Specification • Bluetooth 3.0 (EDR supported) • Bluetooth Power Class 2 • Built-in antenna • Pass key setting is possible • Device name setting is possible • Pairing information of up to 8 devices can be registered Initial Settings Setting Contents Bluetooth communication settings Setting Items Initial Settings Bluetooth passkey "0000" Bluetooth device name "TM-m30II-H_xxxxxx" (Where xxxxxx is the last six digits in the serial number) Bundle Seed ID "TXAEAV5RN4" Enable/Disable auto reconnect to "1" (Enable) iOS device Bluetooth Security Low Bluetooth communication interval Level 1 (Standard) during power saving mode Auto Reconnect Feature The auto reconnect feature allows the printer to automatically restore a connection in the following situations if the Bluetooth connection to the iOS device is lost. • When the printer is turned on • When the signal is dropped and then restored The following shows the printer operations and connection methods when the auto reconnect feature is enabled or disabled. 111
![](/manual_guide/products/epson-tmm30ii-technical-reference-guide-tmm30iih-82002ec/111.png)