Epson TM-m30II Technical Reference Guide TM-m30II-H - Page 74
Resetting the Interface Settings
![]() |
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 3 Advanced Usage Resetting the Interface Settings Follow the steps below to restore the network settings to the factory default. You can return the interface settings to their defaults from the Interface Setup mode. See "Interface Setup Mode" on page 68 for details on the Interface Setup mode. 1 Turn off the printer and close the roll paper cover. 2 If the bottom cover is attached, remove the cover. See "Removing the Covers" on page 92 for details on removing the bottom cover. 3 Hold down the status sheet button while turning on the printer. A message is printed indicating that resetting is being performed, and the printer restarts. 74
![](/manual_guide/products/epson-tmm30ii-technical-reference-guide-tmm30iih-82002ec/74.png)
74
Chapter 3
Advanced Usage
Resetting the Interface Settings
Follow the steps below to restore the network settings to the factory default.
1
Turn off the printer and close the roll paper cover.
2
If the bottom cover is attached, remove the cover.
See
"Removing the Covers" on page 92
for details on removing the bottom cover.
3
Hold down the status sheet button while turning on the printer.
A message is printed indicating that resetting is being performed, and the printer restarts.
You can return the interface settings to their defaults from the Interface Setup mode. See
"Interface
Setup Mode" on page 68
for details on the Interface Setup mode.