Epson TM-m30II Technical Reference Guide TM-m30II-H - Page 66
the Mode selection., After running a self test
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 3 Advanced Usage • Interface Settings • Interface switch waiting time • Main connection interface • LED indicator when I/F starting • Pre-feed before next print • Enabling/disabling the roll paper near-end detector • For details on the memory switches and customized values, see "Software Settings" on page 48. • You can also make the software settings using the ESC/POS commands. Follow the steps below. 1 After running a self test, hold down the Feed button for at least one second to enter the Mode selection. The Mode selection guidance is printed, and the Paper LED flashes. 2 Briefly press the Feed button three times (less than one second), hold it down for at least one second to enter the Software settings mode (Customized value setting). The Software setting mode guidance is printed, and the Paper LED flashes. Customize Value Settings Modes 0: Exit 1: Print Current Settings 2: Print Density 3: Print Speed 4: Automatic Paper Reduction 5: Auto Paper Feed&Cut at cover close 6: Paper Width 7: Character/Font Settings 8: Interface Selection 9: Interface Settings 10: Intelligent Settings 11: Command Execution (Offline) 13: Other Settings Select Modes by executing following procedure. step 1. Press the Feed button less than 1 second as many times as the selected mode number. step 2. Press Feed button for 1 second or more. 66