Epson TM-m30II Technical Reference Guide TM-m30II-H - Page 53
Main connection interface, Autocutting after closing cover, Paper reduction
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter 3 Advanced Usage Main connection interface • Auto (interface that receives data first) (initial setting) • USB • Bluetooth • Ethernet/Wi-Fi • No main connection I/F • When using this printer with multiple interfaces, make sure the interface that is always connected to be set as the main connection. • When using multiple interfaces, set the receive buffer capacity to 4 KB. • You cannot use wired LAN and wireless LAN at the same time. • When you do not use the Bluetooth function, set the Bluetooth security level to "Middle" or "High" to prevent unauthorized access to the printer over Bluetooth. You can change the security level by using Epson TM Utility, TM-m30II Utility, or in the Interface Setup mode. • The displayed items vary depending on the interface configuration. • For information about the function, see "Printing Using Multiple Interfaces" on page 27. Autocutting after closing cover • Cuts (initial setting) • Does not cut Paper reduction Extra upper space reduction • Disabled (initial setting) • Enabled Extra lower space reduction • Disabled (initial setting) • Enabled Line space reduction rate • Not reduced (initial setting) • 25% • 50% • 75% Line feed reduction rate • Not reduced (initial setting) • 25% • 50% • 75% 53