Epson TM-m30II Technical Reference Guide TM-m30II-H - Page 46
The Connection complete window appears. Click [Test Buzzer] or [Test Printing] to, check operation.
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
5 Select the printer to be paired, and then click [Connect]. Chapter 2 Setup 6 If the window to enter a passkey appears, enter a passkey and click [OK]. 7 Select the port to be used from the pull-down list, and then click [OK]. 8 The "Connection complete" window appears. Click [Test Buzzer] or [Test Printing] to check operation. 9 Click [Back to Main screen] to return to the main window. 10 Click the "x" button of TM Bluetooth® Connector to exit. • If "Error" is displayed when you click the [Search] on the TM Bluetooth® Connector, check whether: * The Bluetooth adapter is installed to the computer. * Bluetooth is ON in the Windows settings. • If the device is not displayed on the TM Bluetooth® Connector or the TM Bluetooth® Connector Status shows " " after pairing. Check whether: * The printer is not turned on. Turn on the printer. * The printer is 10 m or further away from the computer. * Confirm that there is no other wireless device, such as a microwave oven and cordless telephone, that can interfere with the Bluetooth printer. * If the printer and the computer are placed in different rooms separated by a wall, move the printer and/or the computer in the same room. * The printer may not be detected when the search time is short. Try search again with longer search time. * While a computer and printer are communicating, the printer cannot be detected by other computers. Confirm that the printer to be detected is not communicating with any computer. 46