Epson U200B Operation Manual - Page 11
triggered when distance A is approximately 6 mm.
View all Epson U200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3. Two spacers are included with the near-end detector. See the illustration below and decide whether or not you want to use them. Use them if you want the near-end detector to be triggered when distance A is 3 to 4 mm; otherwise it will be triggered when distance A is approximately 6 mm. distance A 4. Secure the paper roll near-end detector (and spacers) with two screws. When you insert the spacers, be sure you set the spacers in the direction shown in the illustration. Spacer Setting Up the Printer 1-3
Setting Up the Printer
1–3
3.
Two spacers are included with the near-end detector. See the
illustration below and decide whether or not you want to use
them. Use them if you want the near-end detector to be
triggered when distance A is 3 to 4 mm; otherwise it will be
triggered when distance A is approximately 6 mm.
4.
Secure the paper roll near-end detector (and spacers) with two
screws. When you insert the spacers, be sure you set the
spacers in the direction shown in the illustration.
distance A
Spacer