Epson U200B Operation Manual - Page 27

Model with Serial Interface DIP-Switch Functions DIP Switch Set 1 Switch Function 1-1 Data reception error 1-2 Receive buffer capacity 1-3 Handshaking 1-4 Word length 1-5 Parity check 1-6 Parity selection 1-7 Baud rate 1-8 Busy condition ON OFF Ignored Prints "?" 40 bytes Approximately 1K byte XON/XOFF DTR/DSR 7 bits 8 bits Yes No Even Odd 4800 BPS 9600 BPS Receive buffer full Off line or receive buffer full DIP Switch Set 2 Switch Function ON OFF 2-1 Print column selection 42/35 7 × 9 font/9 × 9 font 40/33 2-2 Reserved. Setting must not be changed. (Fixed to ON) 2-3 I/F pin 6 reset signal Enabled Disabled 2-4 Reserved. Setting must not be changed. (Fixed to ON) CAUTION: Do not change the settings of switches 2-2 and 2-4 (always on). Changing these settings may cause inferior print quality. Setting Up the Printer 1-19