Epson U925 User Manual - Page 27
Setting Up the Printer, There may be some difference between the measured distance A
View all Epson U925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2. Determine the point on the paper roll at which you want the paper roll end detection to be triggered. Then measure the distance A shown in the illustration. distance A Note: There may be some difference between the measured distance A and the actual sensing position. 3. Find the corresponding adjustment position number from the table below. Distance A 10 mm (0.39 inch) 8 mm (0.32 inch) 6 mm (0.24 inch) 4 mm (0.16 inch) 2 mm (0.08 inch) Adjustment position number #1 #2 #3 #4 #5 Setting Up the Printer 1-17
Setting Up the Printer
1-17
2.
Determine the point on the paper roll at which you want the
paper roll end detection to be triggered. Then measure the
distance A shown in the illustration.
Note:
There may be some difference between the measured distance A and
the actual sensing position.
3.
Find the corresponding adjustment position number from the
table below.
Distance A
Adjustment position number
10 mm (0.39 inch)
#1
8 mm (0.32 inch)
#2
6 mm (0.24 inch)
#3
4 mm (0.16 inch)
#4
2 mm (0.08 inch)
#5
distance A