Epson U925 User Manual - Page 54

Electrical Characteristics, Supply voltage, Current consumption

Get Epson U925 - TM B/W Dot-matrix Printer PDF manuals and user guides View all Epson U925 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

❏ Since the slip ejection detector uses a reflective photo detector, paper that has holes or dark portions with low reflection (less than 40% reflection) at the detector position must not be used. (See the illustration below.) 10mm (.39") Paper feed direction Make sure there are no holes and low reflection in this area of the paper Paper holes and low reflection prohibited area ❏ Be sure to perform slip printing with a paper roll loaded to avoid paper jams. ❏ Use thinner paper (N30 or equivalent) between the top and bottom sheets of multi-ply paper. If thick paper is used, the copy capability is lowered Electrical Characteristics Supply voltage: Current consumption: +24 VDC ± 10% Operating: When feeding Mean - approx. 2.3 A, slip paper to approx. 1.4 seconds the print starting position: 4-10 Reference Information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
4-10
Reference Information
❏
Since the slip ejection detector uses a reflective photo detector,
paper that has holes or dark portions with low reflection (less
than 40% reflection) at the detector position must not be used.
(See the illustration below.)
❏
Be sure to perform slip printing with a paper roll loaded to
avoid paper jams.
❏
Use thinner paper (N30 or equivalent) between the top and
bottom sheets of multi-ply paper. If thick paper is used, the
copy capability is lowered
Electrical Characteristics
Paper holes and low reflection prohibited area
Supply voltage:
+24 VDC ± 10%
Current consumption:
Operating:
When feeding
slip paper to
the print
starting
position:
Mean - approx. 2.3 A,
approx. 1.4 seconds
Paper feed direction
10mm
(.39")
Make sure there are
no holes and low reflection
in this area of the paper